FS: Complete 5 speed swap kit!
Thread Starter
Joined: Aug 2003
Posts: 2,036
From: Southern California
FS: Complete 5 speed swap kit!
Up for sales is my complete set of parts to convert a 4g auto to manual.
Parts included:
- 5 speed trans, non-lsd, 94k miles, no bearing issues, very clean, has speed sensor still on.
Also has plug ends from MT engine harness to adapt to original auto plugs.
- Transmission mount
- OEM flywheel with timing ring
- All clutch bolts with washers, all flywheel bolts
- Slave cylinder, no leaks
- Custom made SS braided 1 piece clutch line
- Master cylinder, no leaks
- Clutch pedal assembly, with upper and lower switches
- Brake pedal assembly, rubber pad a bit worn
- Reinforcement bracket for clutch pedal to chassis
- Shifter linkages to trans
- Rubber shifter mount bushing
- Shift lever assembly with bracket, boot, and OEM ****
- Interior trim piece, leather boot should be replaced

Tranny pics soon!

Only need clutch of yours choice, and ready to throw away the slushbox!
Absolute low price of $500 for everything! Would prefer to sale locally, So Cal, but willing to ship if buyer cover it.
Can recommend someone very good to do rebuild and/or install in So Cal.
Will get pics of everything soon.
Thanks!
Parts included:
- 5 speed trans, non-lsd, 94k miles, no bearing issues, very clean, has speed sensor still on.
Also has plug ends from MT engine harness to adapt to original auto plugs.
- Transmission mount
- OEM flywheel with timing ring
- All clutch bolts with washers, all flywheel bolts
- Slave cylinder, no leaks
- Custom made SS braided 1 piece clutch line
- Master cylinder, no leaks
- Clutch pedal assembly, with upper and lower switches
- Brake pedal assembly, rubber pad a bit worn
- Reinforcement bracket for clutch pedal to chassis
- Shifter linkages to trans
- Rubber shifter mount bushing
- Shift lever assembly with bracket, boot, and OEM ****
- Interior trim piece, leather boot should be replaced

Tranny pics soon!

Only need clutch of yours choice, and ready to throw away the slushbox!
Absolute low price of $500 for everything! Would prefer to sale locally, So Cal, but willing to ship if buyer cover it.
Can recommend someone very good to do rebuild and/or install in So Cal.
Will get pics of everything soon.
Thanks!
Last edited by speedymax99; Dec 17, 2010 at 01:22 PM.
Thread Starter
Joined: Aug 2003
Posts: 2,036
From: Southern California
It's not too difficult as long as you have a Plan B (another car) just in case you feel like calling it a day and need to go to work the next day. But man I wish this was FS a few years back. I sourced all the parts, except for the tranny and clutch, then ran out of time (and bought a 5.5 gen) and so I then sold all the parts, no ambition/desire, but this is a great deal here.
GLWS...
GLWS...
Thread Starter
Joined: Aug 2003
Posts: 2,036
From: Southern California
Updated 1st post with pics! Still need to get pics of tranny, but it sitting on a crate and kind of heavy.
As you can see, everything is super clean because it from a West Coast car! Not dirty/rusty like midwest and east coast junk out there.
As you can see, everything is super clean because it from a West Coast car! Not dirty/rusty like midwest and east coast junk out there.
Thread Starter
Joined: Aug 2003
Posts: 2,036
From: Southern California
WOOOWW...Bruh if this was 2months ago it would of be mines. all those weeks and weeks of searching for parts, and you have everything i needed rite here. dang. and I jus got my tranny today.
But in all glws
but if you decide to part out the kit...how much much for
reinforcement bracket, ss clutch line, mas. cylinder and motor mount?
But in all glws
but if you decide to part out the kit...how much much for
reinforcement bracket, ss clutch line, mas. cylinder and motor mount?
Thread Starter
Joined: Aug 2003
Posts: 2,036
From: Southern California
Thread Starter
Joined: Aug 2003
Posts: 2,036
From: Southern California
That's not an excuse! It runs fine on the auto ECU until you can find a MT ecu and get the key reprogrammed for it.
Will get back to you when I find out shipping info...
Will get back to you when I find out shipping info...
man, i know you sold this already, but, can you pm me the info about the guy who can do the swap, i'm pretty sure i can do it myself, but right now i have another project (my 300zx tt) and it's using the space on the garage...
let me know, and if you come accross all the parts again i'll get them!
let me know, and if you come accross all the parts again i'll get them!
Thread Starter
Joined: Aug 2003
Posts: 2,036
From: Southern California
I hate chasing people down, especially in other threads when repeated requests and pm's are being ignored. Its been 5 freaking! months, how about you give me a straight answer about the product I order from you. Every time I ask you say your shipping it out tomorrow and another month goes by and same story. Took you two months to send half the shipment I paid for in full and I have yet to see the rest, 3 months and counting. How about a straight up honest answer, and way of doing business? How about a refund for the other half you haven't sent it?
Thanks
Em
Thanks
Em
Thread Starter
Joined: Aug 2003
Posts: 2,036
From: Southern California
I hate chasing people down, especially in other threads when repeated requests and pm's are being ignored. Its been 5 freaking! months, how about you give me a straight answer about the product I order from you. Every time I ask you say your shipping it out tomorrow and another month goes by and same story. Took you two months to send half the shipment I paid for in full and I have yet to see the rest, 3 months and counting. How about a straight up honest answer, and way of doing business? How about a refund for the other half you haven't sent it?
Thanks
Em
Thanks
Em
Getting back on track, a trans alone is doable freshly rebuilt zero miles.
Thread
Thread Starter
Forum
Replies
Last Post
sdotcarter
6th Generation Maxima (2004-2008)
2
Sep 2, 2015 09:53 PM




Can't get stuck with all the other parts!
