ME FS: 00vi or trade for MEVI
#1
FS: 00vi or trade for MEVI
I have a complete DEK engine sitting in my garage. I did remove the whole intake, its ready to go. I had planned on doing the swap but I'm not sure I want to jump into it. I also bought an AE engine cover, 2nd power valve, and a 4th gen LIM to drill so I could use stock injectors. I really just want an MEVI back as it is so simple to install. I would like to sell the whole pile together or trade for an MEVI. Pics and list of included parts below.
$325 shipped in the CON US.
$325 shipped in the CON US.
Last edited by JSutter; 02-08-2012 at 02:04 PM.
#4
Here are pics of the manifolds and cover on the engine.
http://s130.photobucket.com/albums/p...01/00vi%20DEK/
I will have to dig out the other parts that are in storage.
http://s130.photobucket.com/albums/p...01/00vi%20DEK/
I will have to dig out the other parts that are in storage.
#5
The rest of the parts are up. As you can see there are somethings pictured that probably don't need to be. I started taking the motor apart months ago. I ended up moving all my parts and tools from my parents to my place so some things were mixed in. I will have to start reassembling the motor to weed out the crap.
Included:
5th gen upper intake manifold, with EGR guide tube
5th gen lower intake manifold with swirl valves
4th gen lower intake manifold to use stock injectors
5th gen fuel rail with injectors and wiring complete
5th gen TB with IACV
5th gen front and rear valve covers
5th gen coil packs, all 6
Anniversary engine cover with bracket
Spare Nissan burger for AE cover
Spare cracked coil cover
Spare power valve
Spare 4th gen IACV thats broken but good for mock up or as a template for an adapter plate.
All kinds of brackets, screws, etc.
Included:
5th gen upper intake manifold, with EGR guide tube
5th gen lower intake manifold with swirl valves
4th gen lower intake manifold to use stock injectors
5th gen fuel rail with injectors and wiring complete
5th gen TB with IACV
5th gen front and rear valve covers
5th gen coil packs, all 6
Anniversary engine cover with bracket
Spare Nissan burger for AE cover
Spare cracked coil cover
Spare power valve
Spare 4th gen IACV thats broken but good for mock up or as a template for an adapter plate.
All kinds of brackets, screws, etc.
#16
Ok, I've got a complete MEVI set up with Cover, Canister and RPM switch, looks basically brand new and i haven't installed it. I'd be willing to trade you straight up if your down, we just pay the shipping for each our ends. PM me or text me for faster response 302-438-0156
#19
Ive been debating swapping to 00vi from.my mevi...still in thought but if i did decide to and this is stilll around when indecide id trade...minus the rpm switch cause ill need it to activate the 00vi
#22
5th gen upper intake manifold, with EGR guide tube
5th gen lower intake manifold with swirl valves
5th gen fuel rail with injectors and wiring complete
5th gen TB with IACV
5th gen rear valve cover
5th gen coil packs, all 6
Plus the hardware and little stuff bolted manifold
$250
5th gen lower intake manifold with swirl valves
5th gen fuel rail with injectors and wiring complete
5th gen TB with IACV
5th gen rear valve cover
5th gen coil packs, all 6
Plus the hardware and little stuff bolted manifold
$250
#23
that sounds like a plan to me!!! you wouldnt happen to have the maf off that engine would you?? how about 260 and you send from valve cover and the bracket for the engine cover as well?? pm me and we will talk there
#25
Well i shot you a pm....but scratch the maf... it was for testing purposes lol...ill take the front vc to go with 00vi though... i wasnt sure nissan still sold the bracket but if they do...im on it...
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
01-04-2024 07:01 PM
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM