4th Generation Classifieds (1995-1999) The highly sought after variable intake may be a click away.

ND MOD Partout

Thread Tools
 
Search this Thread
 
Old 10-21-2012 | 07:23 PM
  #1  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
MOD Partout

I upgraded to a g35x.


I have plenty of mods that I won't need anymore.
These parts were either for my 98 project car or drag car.
Project car is probably being sold as is or finished and sold stock.
Drag car is getting a 3.5 swap so some parts are not needed anymore.


SAVV LBM-S5000
Rear view mirror W/ 5" LCD screen
This clips onto any existing mirror. Comes with the rest of the wiring and remote. Has a small spot on the mirror that you can see in the pic.
$50 shipped


95-96 NTK o2 sensor
Has around 30k.
$30 shipped

New Clear/Black bumper lights
These are the ones with black housing and clear lens.
$40 shipped
Also have 2 sets of used clear ones available for $30 shipped


Metal Maxima leds
These were done by org member (Metal Maxima). He did a group by probably 6 years ago. They have never been used. There for the door lights, dome light and map light W/sunroof. I originally paid $65 for these.
$35 shipped


MOMO Millennium steering wheel W/ Momo hub
$225 shipped





Brand new PIAA Plasma Ion Crystal Yellow Fog Bulbs
http://i235.photobucket.com/albums/ee146/fanaticrockford/th_20121021_194108.jpg
SOLD

Warpspeed y-pipe
Slightly collapsed flex and has hole from where I removed the bracket that was welded on.
SOLD

95-96 2.5" Highflow Cat
Can be used on 97-99 as well you would just have to plug the 02 bung.
IIRC this cat was purchased from Budget. Cat has around 30k
SOLD

Pioneer Avic-X710BT
Comes wired for the Maxima or most Nissans and trim ring. There is no adapter for BOSE but it sounds fine without it.
SOLD

Stainless steel brake lines
IIRC these are made by Techna-Fit
Brand new
SOLD

Budget y-pipe
Has a bung welded in for wideband. Around 30k.
SOLD

Energy Suspension sway bar bushing
Brand New
SOLD

R34 Retrofit headlights W/ TSX Projectors
These are practically new and have maybe 3 months use on them.
They were built by the great maxgtr2000.
Black housing R34's
TSX projectors
Generic HID kit with 6k D2S bulbs (One bulb is burnt out and needs replacing)
plug n play wiring harness

SOLD

B&M 70628 trans cooler
Brand new
SOLD

95-97 SE Cluster I'll have to double check on brand but this cluster has bulbs in it that produce a bright white light with no hot spots. I'll work on pics.
Mileage 167,057
SOLD

97-99 red clear outer tails
I'm sure these are rare by now. The bottom clear portion is all clear unlike how there sold now with the outer clear part being red.
Brand New

SOLD

Billet Aluminum MAF adapter
SOLD

Last edited by Maxima_Joe; 01-28-2013 at 10:22 PM.
Old 10-21-2012 | 08:00 PM
  #2  
VQ'rInWLA's Avatar
Senior Member
iTrader: (83)
 
Joined: May 2010
Posts: 12,670
From: West Los Doin Tha Most
In for more parts
Old 10-22-2012 | 08:21 AM
  #3  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Originally Posted by VQ'rInWLA
In for more parts
You looking for anything special?


Also I can give much better deals if you want more then one item.
Old 10-22-2012 | 11:09 AM
  #4  
ShocknAwe's Avatar
Senior Member
iTrader: (3)
 
Joined: Dec 2011
Posts: 3,292
From: Atlanta, Ga
Pm me a picture of the fogs so I can keep it in my inbox. Will probably buy in a few days
Old 10-22-2012 | 11:31 AM
  #5  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Originally Posted by ShocknAwe
Pm me a picture of the fogs so I can keep it in my inbox. Will probably buy in a few days
I only have fog bulbs and the picture is in the post.
Old 10-22-2012 | 08:18 PM
  #6  
VQ'rInWLA's Avatar
Senior Member
iTrader: (83)
 
Joined: May 2010
Posts: 12,670
From: West Los Doin Tha Most
Originally Posted by Maxima_Joe
You looking for anything special?


Also I can give much better deals if you want more then one item.
If youve got a set of smoked one piece cefiros yeah. But Im more intrigued with the mod partout.
Old 10-23-2012 | 07:56 PM
  #7  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Who want's this stuff so I can buy some mods for the g.
Old 10-28-2012 | 12:01 AM
  #8  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Figured people would be jumping on these parts. I might be slightly negotiable on some things.
Old 10-28-2012 | 08:58 AM
  #9  
t6378tp's Avatar
Turbo 3.5
iTrader: (69)
 
Joined: Dec 2005
Posts: 7,796
From: Philly
pm sent
Old 10-28-2012 | 09:06 AM
  #10  
carsnwomen91's Avatar
Senior Member
 
Joined: Jun 2011
Posts: 1,222
From: Mississauga, ON, CANADA
What does that rearview mirror screen display? to what would it hook up if you don't have a double din like your pioneer?

And the pioneer... It fits right into the stock Bose radio? And by no adapter for Bose you mean it won't hook up to a max with stock bose?
Old 10-28-2012 | 09:17 AM
  #11  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Originally Posted by carsnwomen91
What does that rearview mirror screen display? to what would it hook up if you don't have a double din like your pioneer?

And the pioneer... It fits right into the stock Bose radio? And by no adapter for Bose you mean it won't hook up to a max with stock bose?
It can display any video source and also has audio. Most people would use it for a camera or with an indash screen.
It fits just fine, The picture was taken in my 99 Maxima W/Bose. For Bose your suppose to use a converter to lower the signal going to the speakers. I didn't use that and it sounds just fine without it. It can be used for Bose and Non-Bose
Old 10-28-2012 | 06:19 PM
  #12  
Fakie J Farkerton's Avatar
Senior Member
iTrader: (51)
 
Joined: Apr 2012
Posts: 5,192
From: KCK
Still have the clear side tail lights for a '97?!
Old 10-28-2012 | 06:38 PM
  #13  
ChrisMan287's Avatar
Got Retrofit?
iTrader: (34)
 
Joined: Jul 2008
Posts: 14,802
From: NY
Originally Posted by Maxima_Joe
Figured people would be jumping on these parts.
The org is dead.
Old 10-29-2012 | 08:20 AM
  #14  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Originally Posted by ChrisMan287
The org is dead.
Yes it is. Parts are moving but not very fast.
Old 10-29-2012 | 01:26 PM
  #15  
carsnwomen91's Avatar
Senior Member
 
Joined: Jun 2011
Posts: 1,222
From: Mississauga, ON, CANADA
one last thing about the.pioneer... I see it has an sd card slot and another plug (assuming iPod + iPhone Or aux?) but does it have USB?

Last edited by carsnwomen91; 10-29-2012 at 05:00 PM.
Old 10-29-2012 | 03:28 PM
  #16  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Originally Posted by carsnwomen91
one last thing about the.pioneer... I see it has an sd card slot and another plug (assuming iPod + iPhone) but does it have USB?
http://www.pioneerelectronics.com/PU...on/AVIC-X710BT

The front panel has SD card and AUX. There is a 6' cable that comes out of the back of the radio for USB.
Old 10-30-2012 | 10:05 PM
  #17  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Added SS brake lines and another y-pipe.
Old 10-30-2012 | 10:10 PM
  #18  
VQ'rInWLA's Avatar
Senior Member
iTrader: (83)
 
Joined: May 2010
Posts: 12,670
From: West Los Doin Tha Most
Where? I dont see it
Old 10-30-2012 | 10:12 PM
  #19  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Originally Posted by VQ'rInWLA
Where? I dont see it
Look again
Old 11-04-2012 | 05:53 PM
  #20  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Still plenty left
Old 11-08-2012 | 02:25 PM
  #21  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Anybodyyyyyyyyyyyyyyyyyyyy
Old 11-08-2012 | 03:58 PM
  #22  
VQ'rInWLA's Avatar
Senior Member
iTrader: (83)
 
Joined: May 2010
Posts: 12,670
From: West Los Doin Tha Most
Possibly me if you turn some other stuff up . Still hanging around waiting for it.
Old 11-08-2012 | 04:50 PM
  #23  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Originally Posted by VQ'rInWLA
Possibly me if you turn some other stuff up . Still hanging around waiting for it.
I think this is gonna be it for aftermarket stuff other then some audio equipment. Everything else will be going on the drag car.
Old 11-08-2012 | 05:09 PM
  #24  
VQ'rInWLA's Avatar
Senior Member
iTrader: (83)
 
Joined: May 2010
Posts: 12,670
From: West Los Doin Tha Most
Im still holding my breath on the "I think" portion of your statement .
Old 11-08-2012 | 08:57 PM
  #25  
Zach-R's Avatar
Member
iTrader: (3)
 
Joined: Mar 2007
Posts: 251
From: The Burg, Wv
Pm'd you about the budget y pipe.
Old 11-10-2012 | 08:02 PM
  #26  
Excalibur23's Avatar
Member
iTrader: (3)
 
Joined: Mar 2011
Posts: 288
From: Levittown, PA
got my bushings. thanks again bro. and free bump!
Old 11-11-2012 | 11:20 AM
  #27  
Shift_A32B's Avatar
Senior Member
iTrader: (14)
 
Joined: Jul 2010
Posts: 1,867
From: Los Angeles, CA
Pm sent
Old 11-14-2012 | 06:12 PM
  #28  
Goodspeed91's Avatar
Senior Member
 
Joined: May 2009
Posts: 328
From: MN
Willing to negotiate the led lights?
Old 11-14-2012 | 07:22 PM
  #29  
Excalibur23's Avatar
Member
iTrader: (3)
 
Joined: Mar 2011
Posts: 288
From: Levittown, PA
pm sent
Old 11-15-2012 | 10:14 PM
  #30  
Zach-R's Avatar
Member
iTrader: (3)
 
Joined: Mar 2007
Posts: 251
From: The Burg, Wv
What's the inner diameter on the cat? 2.5 inch?
Old 11-16-2012 | 09:01 AM
  #31  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Originally Posted by Zach-R
What's the inner diameter on the cat? 2.5 inch?
I'll double check but I think it's at least 2.5".
Old 11-18-2012 | 05:44 PM
  #32  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
^^^^^^^^^^^^^^
Old 11-23-2012 | 07:14 PM
  #33  
Zach-R's Avatar
Member
iTrader: (3)
 
Joined: Mar 2007
Posts: 251
From: The Burg, Wv
Pm'd about high flow cat....
Old 11-24-2012 | 12:10 PM
  #34  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Couple items left
Old 11-28-2012 | 04:08 PM
  #35  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Anybody want????????????????????
Old 12-03-2012 | 05:26 PM
  #36  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Lowered prices again
Old 12-10-2012 | 11:24 PM
  #37  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
^^^^^^^^^^^^^^
Old 12-16-2012 | 03:54 PM
  #38  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Buy this stuff so I can buy more mods for the G.
Old 12-26-2012 | 08:12 AM
  #39  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Couple more items still for sale.
Old 12-30-2012 | 05:17 PM
  #40  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,775
From: Moorhead, MN
Figured someone would have jumped at the leds and bumper lights.


Quick Reply: ND MOD Partout



All times are GMT -7. The time now is 02:27 PM.