Greddy SP2 cat back $350 plus shipping
Small dent at front of resonator



Clear spoiler brake light $25 shipped
Lens is broke and will need to be glued back on.

Hella horns
Made In germany

Aluminum gauge cluster overlay/Chrome gauge rings SOLD
Both are in great condition. Looks like the overlay was designed for a 98-99 cluster since the trip odometer reset isn't lined up right. So that will need to be drilled out a little. Was a little hard to get off since I kept the overlay on the bezel. If you don't want to do a little drilling then you would just have to remove the overlay from the bezel and reinstall it once the bezel was on the cluster.
http://i235.photobucket.com/albums/e...602_032838.jpg

Aluminum door panel inserts SOLD
Few light scratches, Bottom insert has a bubble in the first M. There will be lots of double sided tape that will need to be removed.
http://i235.photobucket.com/albums/e...602_033416.jpg

Aluminum door sill plates SOLD
Lots of light scratches. Bottom one is the only piece that is slightly bent.
There will be lots of double sided tape that will need to be removed on these as well.
http://i235.photobucket.com/albums/e...602_033201.jpg

AE shift ****SOLD
At the front very bottom it looks like some of the clear has rubbed off and the chrome has started to bubble. Also the rear top of the **** the chrome has started to bubble. You can kind of see it in the pictures.
http://i235.photobucket.com/albums/e...602_022350.jpg
http://i235.photobucket.com/albums/e...602_022418.jpg

Tockico Illuminas paired with Tien S-Techs SOLD
Shocks/struts are rusty. Rear springs have some rust and the dust boots are torn
http://s235.photobucket.com/user/fan...?sort=3&page=1

Otto FSTB SOLD
Brackets are rusty and bar needs a good polishing
http://i235.photobucket.com/albums/e...602_200601.jpg

95-96 Injen intake SOLD
Filter is dirty and has a hole in it.
Does not include MAF or IATS
Has CARB plate which might help you CALI guys.
http://i235.photobucket.com/albums/e...602_201624.jpg
http://i235.photobucket.com/albums/e...602_201549.jpg

Budjet Stainless Steel Y-pipe SOLD
Flex section leaks and will need to be replaced or possibly wrapped with header wrap.
I also put a small nick in the rear downtube from my cut off wheel. It's not bad nor deep but worth mentioning.
http://i235.photobucket.com/albums/e...608_200206.jpg


Clear headlights and corners SOLD
Might also be needing some stock corner lights and possibly headlights.
Condensation in both headlights. Car has been parked for 8 months and we just got a lot of rain so unsure if it would be an issue if the car was used daily. Drivers corner has broken piece that was glued back on. Also has a smudge mark.

http://i235.photobucket.com/albums/e...601_203816.jpg

http://i235.photobucket.com/albums/e...601_203809.jpg

http://i235.photobucket.com/albums/e...601_203842.jpg

http://i235.photobucket.com/albums/e...601_203833.jpg

Clear outer tails (painted red) SOLD
Great condition but could use a repaint.
I happen to have an unopened can of the Testors candy apple red paint, However I am unsure if it's any good. It's been in my garage since probably 02 and has more then likely froze every winter.

http://i235.photobucket.com/albums/e...601_193358.jpg[/

http://i235.photobucket.com/albums/e...0130601_193429.

03-05 Murano 5 spoke wheels SOLD
18x7.5" 35mm offset
Nexen N3000 235/40zr18 Tires with around 5/32"-7/32"


Clear bumper lights SOLD
http://i235.photobucket.com/albums/ee146/fanaticrockford/mod/th_20130602_202128.jpg

http://i235.photobucket.com/albums/ee146/fanaticrockford/mod/th_20130602_202143.jpg

Interested in the following:
Clear headlights and corners-
Aluminum gauge cluster overlay
Chrome gauge rings
AE shift ****
Aluminum door panel inserts
Aluminum door sill plates

Is that condensation in the headlights?
Think you can get the door panel inserts and door sill plates off w/o bending them? I guess the plates I could take as a whole and get the piece off myself.

Where are the prices? Please let me know a package price deal and individual prices. Thanks Joe.

How much for the tails?

Headlight to have condensation. I don't know if it's because it had just rained or from the 7"+ rain we have gotten in the last week. I'll check on the condition of everything. I haven't come up with prices yet since everything is still installed and I don't know the condition of everything. Feel free to make me an offer on anything though.

I'll check on condition and get you pricing or feel free to make me an offer.

Long shot..but wat would you want for the entire car

Added a clear third brake light I found in the door tonight.

Also some Maxima.org license plate frames.


The first 2 people that purchase something that the box is big enough to fit the license plate frame into will get one free.

You know me and condition LOL. LMK about the condition and prices of other items. Pics can be deceiving sometimes. Thanks Joe

EDIT: Is that a small chip at the bottom of the shift ****? Looks weird in one picture.

Photobucket has gone to crap. If when you click the pics and it just opens a new window and not to my Photobucket page then you will need to change the settings in your Maxima.org account.
If it goes to my Photobucket page then you have to click a magnifire in the lower right hand corner of the picture. A new window will open and then click the magnifier again.
I'm working on updating everything I got around to doing today.

Thanks Joe. Yeah, I figured out what PB was doing to me...wasn't in "Full" mode...clicked "Full" mode and all your pics were nice and big.

Just went back to look and the front bottom of the **** has started to bubble.

I have a couple questions on pricing etc,.. sent you a pm

So I'm interested in a lot of things here. Any idea about the AC compressor? I have a gold 96 as well and live over in Billings, MT. I have family in eastern MT and might think about driving over to pick stuff up if it was worth it. Y pipe, other exhaust, lights, etc.

I beleive the ac compressor is shot but this isn't a full part out yet. I'm just parting out all the aftermarket stuff.
That would be a long drive especially going thru oil country.

pm sent

OK Everything should have pricing,pictures and descriptions other then the Hella horns which I may keep.

I feel my pricing is reasonable but I'm willing to work with anybody.
Might be interested in trades. I know I'll need some stock intake pieces, stock y-pipe, MAf and possibly headlights and corner lights.

Suspension sold and both license plate frames are spoken for.

^^^^^^^^^^^^^^^^

ill take the injen intake.
whats your paypal?

FSTB sold

Still got corners?? Ill take those

money sent for the intake.

if you can wait until next Friday i will buy the headlights and corners from you too.

Intake sold.
Just a few items left.

PM Sent.

y-pipe sold.

Headlights, bumper lights, tail lights, brake light, catback and wheels still available.

Clear brake light, bumper lights and catback is all that remains.

Teehee

Thanks

Still a few items left.

Still have a few items.

Got my items in today. Thanks again.

Catback and clear spoiler light is all that remains.

Is it just me or is this ceramic coated?

The cat back is stainless.

Catback is still available and has been removed from the car.
Clear third brake light is also still available.

Bump