Member
Quote:
More parts I thought about...
Almost complete front suspension rebuild kit - $250 shipped (these parts easily cost about $350)
- Moog ball joints, sway bar end links, tie rod ends
- Energy Suspension front sway bar bushings, control arm bushings
- Energy Suspension solid motor mount inserts (and clean empty motor mounts)
- Ichiba extended studs 20x IIRC 50mm
Also I have front spindles with nothing in them, front hubs with nothing in them, and bare control arms. They were all ready to go in minus wheel bearings. I wrecked the week before I planned to install everything...
NEAR MINT Q45 steering wheel with audio control and pac switch (not the pac switch but the other one) wiring is VERY similar. Cruise Control power is on the wheel instead of in the dash, and the audio i think has two wires. Unfortunately I didnt try hard enough to make it work, but it should be doable. It would be sexy, I want to see someone do it! Will come with clock spring in case you need it or want it to reference or use.
Still have:
JIC's - $700 (this seems to be the going rate)
Originally Posted by max_dreamer
UPDATE...More parts I thought about...
Almost complete front suspension rebuild kit - $250 shipped (these parts easily cost about $350)
- Moog ball joints, sway bar end links, tie rod ends
- Energy Suspension front sway bar bushings, control arm bushings
- Energy Suspension solid motor mount inserts (and clean empty motor mounts)
- Ichiba extended studs 20x IIRC 50mm
Also I have front spindles with nothing in them, front hubs with nothing in them, and bare control arms. They were all ready to go in minus wheel bearings. I wrecked the week before I planned to install everything...
NEAR MINT Q45 steering wheel with audio control and pac switch (not the pac switch but the other one) wiring is VERY similar. Cruise Control power is on the wheel instead of in the dash, and the audio i think has two wires. Unfortunately I didnt try hard enough to make it work, but it should be doable. It would be sexy, I want to see someone do it! Will come with clock spring in case you need it or want it to reference or use.
Still have:
JIC's - $700 (this seems to be the going rate)
Does the almost complete front suspension rebuild kit include the bare front spindles, hubs and control arms?
Do you have the power steering column with the Q45 steering wheel, including column cover? Also, not sure, but is the steering wheel heated? I'm willing to give it a shot in my 4th Gen. BTW, clock spring would be much appreciated also.
Is that $700 shipped to 11552 for JIC's?
Member
Quote:
Originally Posted by Slamrod
This thread is dead, the seller hasnt logged on in nearly a month.
I understand that, but I'm wondering why Wizard replied with updated list info on 12/24/13?
Quote:
Because I saw that you and others expressed interest in parts that I personally bought 3 months ago... Was just simply informing you and others and helping out max_dreamer by updating what I know is sold. FWIW, he mentioned in PM he had a bunch of local buyers interested in stuff, so the rest may or may not be sold.Originally Posted by Blood on Black
I understand that, but I'm wondering why Wizard replied with updated list info on 12/24/13?
Member
Quote:
Originally Posted by The Wizard
Because I saw that you and others expressed interest in parts that I personally bought 3 months ago... Was just simply informing you and others and helping out max_dreamer by updating what I know is sold. FWIW, he mentioned in PM he had a bunch of local buyers interested in stuff, so the rest may or may not be sold.
Hey, didn't hurt to ask....would have loved those JIC's....but thanks anyway for the info. I will just assume they're gone. Too bad I didn't have my car 3 months ago!
Banned
FYI- JIC coilovers & all the suspension goodies (bare spindles, bare hubs, bare lower control arms, bare motor mounts, Moog Ball joints, Moog Tie Rod Ends, ES Motor Mounts, ES LCA Bushings, ES Sway Bar Endlinks, Ichiba Extended Wheel Studs, Open ended Blue Lugs) are all sold.
Wow, so apparently I dont get emails telling me I have posts in the tread... So I just never came back. Sorry about that everybody.
Wizard is right though, hes got my suspension and exhaust. How is that stuff Wizard? Work out ok for ya?
And vq4thgen4life did buy all my suspension products and got my stainless steel clutch line and I had some open ended blue lugs he got too.
Quickywd01, I do still have the PFTB and adapter plates surprisingly. The people I talked to before didnt want it now.
Sorry I hadnt been on here, I have been pretty busy with work and other things. That and I thought most of you were on the facebook group.
Ill update first post and continue from there.
Wizard is right though, hes got my suspension and exhaust. How is that stuff Wizard? Work out ok for ya?
And vq4thgen4life did buy all my suspension products and got my stainless steel clutch line and I had some open ended blue lugs he got too.
Quickywd01, I do still have the PFTB and adapter plates surprisingly. The people I talked to before didnt want it now.
Sorry I hadnt been on here, I have been pretty busy with work and other things. That and I thought most of you were on the facebook group.
Ill update first post and continue from there.
Quote:
Considering the rarity of the item, id do 100.Originally Posted by SquirrelPig
How much do you want for the 99 SE 5sp ECU?
http://www.ebay.com/itm/99-Nissan-Maxima-SE-MT-ECU-ECM-Engine-Control-Unit-Computer-A18-J50-4E6-B-/321302044568?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1999%7CModel%3AMaxima%7CSubmodel%3ASE&hash=item4acf181f98&vxp=mtr
Quote:
Thanks
I have the full interior still. Well 90%. Also, I have the 00-01 Infiniti i30 rear fold down seat mod. So, it's not a direct swap, although it is somewhat simple to do.Originally Posted by speed3000gt
Do you have any seats available? I prefer rear, but might be interested in front as well.Thanks
Junior Member
Quote:
Will you send/post a pic of the model number specifics? If it's what I need I'll take it; have cash in hand.Originally Posted by max_dreamer
Considering the rarity of the item, id do 100.
PM's answered. It is far to cold to be going outside to pull parts right now.
I dont have pics of the ECU and likely wont pull it till it's sold, if it's sold. If you need a 99 Fed spec, 5spd, SE ECU, then this is it.
I dont have pics of the ECU and likely wont pull it till it's sold, if it's sold. If you need a 99 Fed spec, 5spd, SE ECU, then this is it.