TX FS: Parting Out 99 SE 5spd
#1
FS: Parting Out 99 SE 5spd
UPDATE...
Clean stock tail lights
99 SE 5spd Fed Spec ECU
NEAR MINT Q45 steering wheel with audio control and pac switch (not the pac switch but the other one) wiring is VERY similar. Cruise Control power is on the wheel instead of in the dash, and the audio i think has two wires. Unfortunately I didnt try hard enough to make it work, but it should be doable. It would be sexy, I want to see someone do it! Will come with clock spring in case you need it or want it to reference or use.
Still have:
PFTB w/ 00vi adapter plates w/ functioning Cruise Control - $200 (only one with CC)
Blue interior led'd stuff - $ negotiable (99 SE gauges, 99 ACC, and clock)
MB Quart PVL216 front door components custom mounted in bose housing - $100 (requires enlarged holes in door panels for tweeters, easy job but you need a skill saw)
Rockford Fosgate Punch P400-1 - $150
Rockford Fosgate Punch P300-2 - $100
OLD or SOLD...
Almost complete front suspension rebuild kit - $250 shipped (these parts easily cost about $350) SOLD
- Moog ball joints, sway bar end links, tie rod ends
- Energy Suspension front sway bar bushings, control arm bushings
- Energy Suspension solid motor mount inserts (and clean empty motor mounts)
- Ichiba extended studs 20x IIRC 50mm
Also I have front spindles with nothing in them, front hubs with nothing in them, and bare control arms. They were all ready to go in minus wheel bearings. I wrecked the week before I planned to install everything...
TWM STS with A6 Leopard 5spd shift **** - $150 shipped (that's $350 new and shifts amazing) SOLD
Innovate LC-1 w/ new o2 + Innovate DB-1 mounted in 5spd trim - $150 (blue gauge) SOLD
Pioneer AVH-P3400BH headunit w/ PNP harness and e-brake override - $300 SOLD
Stillen RSB - $50 (needs paint n stuff, but it is what it is) SOLD
Redline Goods leathers - $200 (shift and e-brake boots, armrest padded cover, and the ONLY set of padded door inserts made) SOLD
JIC's - $700 (this seems to be the going rate) SOLD
G35 19x8.5 Rays - $700 (all 4 rear wheels fit almost flush front and back) SOLD
Cattman Headers and Fast Cat - $400 ($1200 new and hard to find now) SOLD
Greddy Spectrum Elite catback exhaust - $400 ($680 new and it's discontinued) SOLD
Ok, so, if you happen to be on facebook you've probably already seen that I had a wreck on Friday. I slid under a Dodge Nitro and ruined the front rad support. YES, I KNOW IT'S FIXABLE, but I just want to get out of the A Chassis game.
For the time being, id like to just part with things that I can live without. The car still drives fine and so i'm demoding and selling as I go. If it is required to run, i'm not parting with it till the last minute.
1 important item I can part with is, Greddy Emanage Ultimate w/ 99 pnp patch harness. Also wired in is an Innovate LC-1 for which I have a new o2 sensor. Also, a blue DB-1 gauge has been somewhat retro'd into the stock 5spd shifter trim in place of the cig lighter. Id like to get $550 for all of this. SOLD
Let me know other things you may want.
I have a full blue LED interior to include, cruise control switch, 99 AC controls, windows switches for 99, security light. Also, the clock and AC controls have purple film on them to have more of a blue LCD tint to it. It makes them a bit dimmer but still easily readable. Id like $75 for everything. SOLD - window switches, security light, and dimmer
Message me here for my phone number if you'd like. Or find me on facebook.
Clean stock tail lights
99 SE 5spd Fed Spec ECU
NEAR MINT Q45 steering wheel with audio control and pac switch (not the pac switch but the other one) wiring is VERY similar. Cruise Control power is on the wheel instead of in the dash, and the audio i think has two wires. Unfortunately I didnt try hard enough to make it work, but it should be doable. It would be sexy, I want to see someone do it! Will come with clock spring in case you need it or want it to reference or use.
Still have:
PFTB w/ 00vi adapter plates w/ functioning Cruise Control - $200 (only one with CC)
Blue interior led'd stuff - $ negotiable (99 SE gauges, 99 ACC, and clock)
MB Quart PVL216 front door components custom mounted in bose housing - $100 (requires enlarged holes in door panels for tweeters, easy job but you need a skill saw)
Rockford Fosgate Punch P400-1 - $150
Rockford Fosgate Punch P300-2 - $100
OLD or SOLD...
Almost complete front suspension rebuild kit - $250 shipped (these parts easily cost about $350) SOLD
- Moog ball joints, sway bar end links, tie rod ends
- Energy Suspension front sway bar bushings, control arm bushings
- Energy Suspension solid motor mount inserts (and clean empty motor mounts)
- Ichiba extended studs 20x IIRC 50mm
Also I have front spindles with nothing in them, front hubs with nothing in them, and bare control arms. They were all ready to go in minus wheel bearings. I wrecked the week before I planned to install everything...
TWM STS with A6 Leopard 5spd shift **** - $150 shipped (that's $350 new and shifts amazing) SOLD
Innovate LC-1 w/ new o2 + Innovate DB-1 mounted in 5spd trim - $150 (blue gauge) SOLD
Pioneer AVH-P3400BH headunit w/ PNP harness and e-brake override - $300 SOLD
Stillen RSB - $50 (needs paint n stuff, but it is what it is) SOLD
Redline Goods leathers - $200 (shift and e-brake boots, armrest padded cover, and the ONLY set of padded door inserts made) SOLD
JIC's - $700 (this seems to be the going rate) SOLD
G35 19x8.5 Rays - $700 (all 4 rear wheels fit almost flush front and back) SOLD
Cattman Headers and Fast Cat - $400 ($1200 new and hard to find now) SOLD
Greddy Spectrum Elite catback exhaust - $400 ($680 new and it's discontinued) SOLD
Ok, so, if you happen to be on facebook you've probably already seen that I had a wreck on Friday. I slid under a Dodge Nitro and ruined the front rad support. YES, I KNOW IT'S FIXABLE, but I just want to get out of the A Chassis game.
For the time being, id like to just part with things that I can live without. The car still drives fine and so i'm demoding and selling as I go. If it is required to run, i'm not parting with it till the last minute.
1 important item I can part with is, Greddy Emanage Ultimate w/ 99 pnp patch harness. Also wired in is an Innovate LC-1 for which I have a new o2 sensor. Also, a blue DB-1 gauge has been somewhat retro'd into the stock 5spd shifter trim in place of the cig lighter. Id like to get $550 for all of this. SOLD
Let me know other things you may want.
I have a full blue LED interior to include, cruise control switch, 99 AC controls, windows switches for 99, security light. Also, the clock and AC controls have purple film on them to have more of a blue LCD tint to it. It makes them a bit dimmer but still easily readable. Id like $75 for everything. SOLD - window switches, security light, and dimmer
Message me here for my phone number if you'd like. Or find me on facebook.
Last edited by max_dreamer; 02-05-2014 at 05:46 PM.
#5
Small update. I should be taking things apart this weekend. Ive been crazy busy at work and prepping to move so I havent done anything with the car.
599"max" - I am supposed to be receiving payment today for the EU but if it falls through, you are next in line.
Climaxx - I have 2 5spd shifter trims... But, 1 has an Innovate DB-1 wideband gauge cut into it, and the other may end up going with the 5spd swap to my local buddy. If those fall through, you are next in line.
As far as armrest boot, shift boot and ebrake boot. I have all redline goods stuff as well as the only set of their door inserts... They are currently claimed but if he backs out, ill post pics and let yall have at um.
599"max" - I am supposed to be receiving payment today for the EU but if it falls through, you are next in line.
Climaxx - I have 2 5spd shifter trims... But, 1 has an Innovate DB-1 wideband gauge cut into it, and the other may end up going with the 5spd swap to my local buddy. If those fall through, you are next in line.
As far as armrest boot, shift boot and ebrake boot. I have all redline goods stuff as well as the only set of their door inserts... They are currently claimed but if he backs out, ill post pics and let yall have at um.
#7
BUMP!
Check first post. Somewhat of a parts list and pricing up. Let me know what you would like pics of. I have some and can take what you'd like to see.
photobucket pics of some stuff
Check first post. Somewhat of a parts list and pricing up. Let me know what you would like pics of. I have some and can take what you'd like to see.
photobucket pics of some stuff
#8
Interested in the following:
JIC's - $700 (this seems to be the going rate)
Cattman Headers and Fast Cat - $400 ($1200 new and hard to find now)
Greddy Spectrum Elite catback exhaust - $400 ($680 new and it's discontinued)
Pics please
JIC's - $700 (this seems to be the going rate)
Cattman Headers and Fast Cat - $400 ($1200 new and hard to find now)
Greddy Spectrum Elite catback exhaust - $400 ($680 new and it's discontinued)
Pics please
#12
Some PM's replied. I've got some interest on Facebook as well. Im trying to keep people in order of responses. Also, larger quantity purchases will get more pull than shipping 1 thing. It's not cost effective to ship 1 large item.
Wizard, your parts radar must have been going off, cause you've got first dibs on what you wanted. Im going to do what I can tonight and tomorrow to get stuff off, cleaned up and pictured.
Wizard, your parts radar must have been going off, cause you've got first dibs on what you wanted. Im going to do what I can tonight and tomorrow to get stuff off, cleaned up and pictured.
#14
Some PM's replied. I've got some interest on Facebook as well. Im trying to keep people in order of responses. Also, larger quantity purchases will get more pull than shipping 1 thing. It's not cost effective to ship 1 large item.
Wizard, your parts radar must have been going off, cause you've got first dibs on what you wanted. Im going to do what I can tonight and tomorrow to get stuff off, cleaned up and pictured.
Wizard, your parts radar must have been going off, cause you've got first dibs on what you wanted. Im going to do what I can tonight and tomorrow to get stuff off, cleaned up and pictured.
#15
#17
Here are some more pics.
This one is the functional Cruise Control on a PFTB
Here is the kinda ghetto homemade bracket and the whole assembly. Works juuuust fine!
Some front door speakers...
All the Redlinegoodness you could want! Still have to make the rears whenever someone decides to buy them... Remember, ONLY SET ever.
This one is the functional Cruise Control on a PFTB
Here is the kinda ghetto homemade bracket and the whole assembly. Works juuuust fine!
Some front door speakers...
All the Redlinegoodness you could want! Still have to make the rears whenever someone decides to buy them... Remember, ONLY SET ever.
#24
Sorry for the delay! More pics in the photobucket album but here are a couple. Feel free to browse.
Oh, and BTW, the Cattman headers are, IIRC, the Gen3's... Yes they have an EGR.
It was pretty dirty under there haha. A little before and after, half and half shot. Still needs a good polish though.
Muffler looken all sexy again! Some backup battle scars... :/ The low life...
Oh, and BTW, the Cattman headers are, IIRC, the Gen3's... Yes they have an EGR.
It was pretty dirty under there haha. A little before and after, half and half shot. Still needs a good polish though.
Muffler looken all sexy again! Some backup battle scars... :/ The low life...
#25
Some Cattman Fast Cat goodness!
Still pretty clean in there.
Still plenty of flow!
Gaskets... Not sure why, but gaskets... Hardware could be reused or replaced. None of them had any problems coming off. Gaskets were OEM Nissan fronts and GReddy paper rear.
Oh, and mid pipe! Its got a couple battle scars too, nothing serious though.
Still pretty clean in there.
Still plenty of flow!
Gaskets... Not sure why, but gaskets... Hardware could be reused or replaced. None of them had any problems coming off. Gaskets were OEM Nissan fronts and GReddy paper rear.
Oh, and mid pipe! Its got a couple battle scars too, nothing serious though.
#28
I am the original owner of everything. Approximately 20k in 3 years. Primarily highway miles. Bought the headers and cat directly from Brian. Exhaust i spent 2 months tracking it down and purchased 3 others before that, only to be refunded because the didn't have it.
#29
Ok, so I finally got some time to take the rear header off. It was stuck between the firewall and the motor. Damn long studs. Anywho, here are some pics. The front and rear Bosch O2's are still in there. I was getting eaten alive by mosquitoes and didnt wanna f with it haha.
Wizard, I got a hold of a box that could potentially fit the exhaust components in it. I can get one easily for the CO's. Ill do what I can to get you a shipping quote tomorrow and Ill IM you back. Sorry for the delays!
Have a local sale pending on the Stillen RSB, generic FSTB, suspension rebuild kit, and motor mounts.
I also have to return some PM's on some other stuff. Will update the first post when things are officially sold.
Flex section still perfect!
Speed bump battle damage! The loop is unbent!
Front
Rear
Wideband O2 bung. Could be prettier for sure.
Wizard, I got a hold of a box that could potentially fit the exhaust components in it. I can get one easily for the CO's. Ill do what I can to get you a shipping quote tomorrow and Ill IM you back. Sorry for the delays!
Have a local sale pending on the Stillen RSB, generic FSTB, suspension rebuild kit, and motor mounts.
I also have to return some PM's on some other stuff. Will update the first post when things are officially sold.
Flex section still perfect!
Speed bump battle damage! The loop is unbent!
Front
Rear
Wideband O2 bung. Could be prettier for sure.
#30
No problem on the delay max dreamer. Thanks for the pics. Looks good. Can I trouble you for a few daytime pics of the catback? Especially the top and bottom of the tip and muffler? Thanks!