Custom Shift knob from Mad Dahn installed
#1
Custom Shift **** from Mad Dahn installed
I am very happy with this **** and how great it looks in my I30 (I'll post more pics soon). If any of you have considered getting a custom shift **** in your car, contact Mad Dahn because he really does a great job. After cutting my stock shifter a couple of inches to install this ****, it really looks and feels similar to the **** in my friends BMW M3. What do you guys think?
#6
Moderator who thinks he is better than us with his I30
iTrader: (8)
Join Date: May 2002
Posts: 9,335
Very nice!!!
I cut my stock shifter as well and stuck on a chrome shifter. I like yours alot. I would be very interested in one. How do I get ahold of Mad Dahn?
Also, how does it go on since we cut off our threads? I would guess with 3 small screws like my chrome one is. Since our stock ones are kind of long, is this one the same length? I would think a short one would leave a space of exposed shift rod.
I cut my stock shifter as well and stuck on a chrome shifter. I like yours alot. I would be very interested in one. How do I get ahold of Mad Dahn?
Also, how does it go on since we cut off our threads? I would guess with 3 small screws like my chrome one is. Since our stock ones are kind of long, is this one the same length? I would think a short one would leave a space of exposed shift rod.
#8
dam, it feels like the BMW?! i am VERY TEMPTED to get one now....man that looks great. I need a bigger **** cause i have big hands and i like touch wrist when grabbing the stock ****....
u know what they say about negro guys with big hands
u know what they say about negro guys with big hands
#14
Originally posted by MaxSpeedSE
I dont like the maxima shift ***** at all, i dont like that one eather... its so big and rounded...and anothere thing i hate is how the shift ***** are so long, witch makes the stick even higher
I dont like the maxima shift ***** at all, i dont like that one eather... its so big and rounded...and anothere thing i hate is how the shift ***** are so long, witch makes the stick even higher
#15
Man I have to get one of these. I'll e-mail you at the end of the month when I get paid. This would look tight in redmax007's car with 007 and red lighting. Can you make any design? Please post pics of it installed so I know how high it sits.
#16
Originally posted by A-Ron Max
Its no bigger than the stock shift **** and I cut my shifter significantly so it sits about an inch or so lower than my stock shifter did.
Its no bigger than the stock shift **** and I cut my shifter significantly so it sits about an inch or so lower than my stock shifter did.
#17
I think I hear what Maxspeed is saying. In an aftermarket **** I prefer the thread go all the way to the "top" of the ****. I prefer spherical ***** for the feel as well, and this is usually how it's done in a spherical **** (the hole for the thread will be all the way to the top of the ball). Thus, you're actually tugging from the top of the lever, rather than above the top of the lever.
It felt better in my Acura (plus the 'feel' advantages of a sphere as well). I'm indecisive when it comes to putting one in the maxima - I'd want a polished aluminum ball ****, like in my acura (see sig URL for pics), but I feel in this case it might take away from the "plush" interior, not to mention negatives from temperature.
Dhan - you ever considered making a spherical design with the thread all the way through, possibly with graphics flush on the sphere? Like this?:
http://www.knobmeister.com/page4.html
It felt better in my Acura (plus the 'feel' advantages of a sphere as well). I'm indecisive when it comes to putting one in the maxima - I'd want a polished aluminum ball ****, like in my acura (see sig URL for pics), but I feel in this case it might take away from the "plush" interior, not to mention negatives from temperature.
Dhan - you ever considered making a spherical design with the thread all the way through, possibly with graphics flush on the sphere? Like this?:
http://www.knobmeister.com/page4.html
#18
Wow...thanks for making me get off my **** and find that URL...I didn't realize, but on page 5 of that site, the guy has a fair share of wood **** offerings with custom laser engraving available on all of them. I may have to see if I can get one to closely match my wood kit finish & get a maxima design engraved on there. Sweet.
#19
Originally posted by blizz20oma
I think I hear what Maxspeed is saying. In an aftermarket **** I prefer the thread go all the way to the "top" of the ****. I prefer spherical ***** for the feel as well, and this is usually how it's done in a spherical **** (the hole for the thread will be all the way to the top of the ball). Thus, you're actually tugging from the top of the lever, rather than above the top of the lever.
It felt better in my Acura (plus the 'feel' advantages of a sphere as well). I'm indecisive when it comes to putting one in the maxima - I'd want a polished aluminum ball ****, like in my acura (see sig URL for pics), but I feel in this case it might take away from the "plush" interior, not to mention negatives from temperature.
Dhan - you ever considered making a spherical design with the thread all the way through, possibly with graphics flush on the sphere? Like this?:
http://www.knobmeister.com/page4.html
I think I hear what Maxspeed is saying. In an aftermarket **** I prefer the thread go all the way to the "top" of the ****. I prefer spherical ***** for the feel as well, and this is usually how it's done in a spherical **** (the hole for the thread will be all the way to the top of the ball). Thus, you're actually tugging from the top of the lever, rather than above the top of the lever.
It felt better in my Acura (plus the 'feel' advantages of a sphere as well). I'm indecisive when it comes to putting one in the maxima - I'd want a polished aluminum ball ****, like in my acura (see sig URL for pics), but I feel in this case it might take away from the "plush" interior, not to mention negatives from temperature.
Dhan - you ever considered making a spherical design with the thread all the way through, possibly with graphics flush on the sphere? Like this?:
http://www.knobmeister.com/page4.html
#20
Team Voodoo ( www.teamvoodoo.com ) also sells pistol-grip ***** in a few finishes I think. But I don't know if the thread runs all the way up the ***** in that case. You could email the guy and ask. Not trying to take any business away from Dhan of course (I think it's very cool what he does for the .org), just a suggestion.
With all the Miata ***** out there, every Max owner should be able to find exactly what they want in a shift **** without having to get a janky universal aftermarket one
With all the Miata ***** out there, every Max owner should be able to find exactly what they want in a shift **** without having to get a janky universal aftermarket one
#21
Originally posted by JR_Anders
Man I have to get one of these. I'll e-mail you at the end of the month when I get paid. This would look tight in redmax007's car with 007 and red lighting. Can you make any design? Please post pics of it installed so I know how high it sits.
Man I have to get one of these. I'll e-mail you at the end of the month when I get paid. This would look tight in redmax007's car with 007 and red lighting. Can you make any design? Please post pics of it installed so I know how high it sits.
http://home.socal.rr.com/dhan/DSC00281.gif
http://home.socal.rr.com/dhan/DSC00280.gif
#22
Originally posted by Mad Dhan
here is how it sits in my car
http://home.socal.rr.com/dhan/DSC00281.gif
http://home.socal.rr.com/dhan/DSC00280.gif
here is how it sits in my car
http://home.socal.rr.com/dhan/DSC00281.gif
http://home.socal.rr.com/dhan/DSC00280.gif
do you think you could do something for an AUTO?
#23
Originally posted by bags533
do you think you could do something for an AUTO?
do you think you could do something for an AUTO?
#24
see the stim part that screws on is just too long for my taste
http://home.socal.rr.com/dhan/DSC00280.gif
http://home.socal.rr.com/dhan/DSC00280.gif
#25
Re: Custom Shift **** from Mad Dahn installed
Originally posted by A-Ron Max
I am very happy with this **** and how great it looks in my I30 (I'll post more pics soon). If any of you have considered getting a custom shift **** in your car, contact Mad Dahn because he really does a great job. After cutting my stock shifter a couple of inches to install this ****, it really looks and feels similar to the **** in my friends BMW M3. What do you guys think?
I am very happy with this **** and how great it looks in my I30 (I'll post more pics soon). If any of you have considered getting a custom shift **** in your car, contact Mad Dahn because he really does a great job. After cutting my stock shifter a couple of inches to install this ****, it really looks and feels similar to the **** in my friends BMW M3. What do you guys think?
Thread
Thread Starter
Forum
Replies
Last Post
MaxLife17
8th Generation Maxima (2016-)
43
06-27-2019 01:37 PM
jds22
8th Generation Maxima (2016-)
5
09-04-2015 01:52 PM