"bar thing" on the doors
11-24-2002, 08:07 PM
#1
Senior Member
Thread Starter
Join Date: Apr 2002
Posts: 212
"bar thing" on the doors
can any one tell me how this is attached and will it leave holes if i take it off or is it just stuck on with double sided tape? has anyone else taken this off, i think a few have but i am not sure.
thanx
its the bottom pic
thanx
its the bottom pic
11-24-2002, 08:10 PM
#2
Re: "bar thing" on the doors
Originally posted by Rufus
can any one tell me how this is attached and will it leave holes if i take it off or is it just stuck on with double sided tape? has anyone else taken this off, i think a few have but i am not sure.
thanx
its the bottom pic
can any one tell me how this is attached and will it leave holes if i take it off or is it just stuck on with double sided tape? has anyone else taken this off, i think a few have but i am not sure.
thanx
its the bottom pic
you mean the trim? and I think it does leave holes. not 100% on that.
11-24-2002, 08:23 PM
#6
Originally posted by UNCDooD
dude, wtf is up with the dudes in the sig?
dude, wtf is up with the dudes in the sig?
http://forums.maxima.org/showthread....hreadid=168898
11-24-2002, 08:30 PM
#7
Guest
Posts: n/a
Yes
Yes there are holes under the that side panel. I know this because mine recently fell off somehow. However, there is also a substantial amount of double sided tape. My suggestion would be that you dont take it off because even if you do get the tape/sticky substance clear, it will look odd. It leaves a noticable indentation.
11-25-2002, 02:31 PM
#14
Junior Member
Join Date: Nov 2002
Posts: 24
I removed my pieces on the side. My suggestion is don't do it! It took me forever to fiberglass it in and to get it right finally. There is a valley underneath the rubber (the metal is indented inward) and there are holes periodically. There is also double sided tape. I will never do it again.
http://www.geocities.com/ericmilr30@...t/maxima1.html
http://www.geocities.com/ericmilr30@...t/maxima1.html
11-25-2002, 02:39 PM
#15
Senior Member
Join Date: Jul 2001
Posts: 7,530
Originally posted by visionmax
I removed my pieces on the side. My suggestion is don't do it! It took me forever to fiberglass it in and to get it right finally. There is a valley underneath the rubber (the metal is indented inward) and there are holes periodically. There is also double sided tape. I will never do it again.
http://www.geocities.com/ericmilr30@...t/maxima1.html
I removed my pieces on the side. My suggestion is don't do it! It took me forever to fiberglass it in and to get it right finally. There is a valley underneath the rubber (the metal is indented inward) and there are holes periodically. There is also double sided tape. I will never do it again.
http://www.geocities.com/ericmilr30@...t/maxima1.html
SuDZ
11-25-2002, 03:36 PM
#16
i usually don't like those wings in person but i don't mind seeing them every now n then. i'm a big fan of that blue, seems like more and more people have it every month but it's still awesome! lets see some more pics of the car.
11-26-2002, 05:05 AM
#17
Junior Member
Join Date: Nov 2002
Posts: 24
The wing was taken off last week and I am thinking about getting a wing similar to the skyline R-34's. After all is done all there is on the sides is one line, the body line. I guess that could be taken off too. It would probably be a lot easier in hind sight.
http://www.geocities.com/ericmilr30@...t/maxima2.html
sorry i'm at work and only saved 2 pics.
http://www.geocities.com/ericmilr30@...t/maxima2.html
sorry i'm at work and only saved 2 pics.
11-26-2002, 05:31 AM
#18
Originally posted by funnylittlman
UNCDood,
does your Trans have the same LED in the front as Knight Rider??? LOOKS like it!!!
That was my fav. show in the whole wide world.
Oh and yes, they do leave holes!
UNCDood,
does your Trans have the same LED in the front as Knight Rider??? LOOKS like it!!!
That was my fav. show in the whole wide world.
Oh and yes, they do leave holes!
go check it out.
www.geocities.com/kitt_lab3/
the car is actually my dads.
11-26-2002, 06:41 AM
#19
UNC,
That car is beautiful! I actually got to sit in the actual "KIT" from the 80's, back when I was 7, yea that was awhile ago. Does your dad have an operational "Kit" voice (a.k.a. Mr. Pheenie)? How 'bout buttons? Do any of them work? Oh man I would love a ride in that!
That car is beautiful! I actually got to sit in the actual "KIT" from the 80's, back when I was 7, yea that was awhile ago. Does your dad have an operational "Kit" voice (a.k.a. Mr. Pheenie)? How 'bout buttons? Do any of them work? Oh man I would love a ride in that!
11-26-2002, 09:43 AM
#20
Senior Member
Join Date: Jul 2001
Posts: 7,530
Originally posted by funnylittlman
UNC,
That car is beautiful! I actually got to sit in the actual "KIT" from the 80's, back when I was 7, yea that was awhile ago. Does your dad have an operational "Kit" voice (a.k.a. Mr. Pheenie)? How 'bout buttons? Do any of them work? Oh man I would love a ride in that!
UNC,
That car is beautiful! I actually got to sit in the actual "KIT" from the 80's, back when I was 7, yea that was awhile ago. Does your dad have an operational "Kit" voice (a.k.a. Mr. Pheenie)? How 'bout buttons? Do any of them work? Oh man I would love a ride in that!
getting kind of excited there huh?SuDZ
.............
11-26-2002, 08:03 PM
#23
That's why we welded a plate over everything. It still took forever to get it all even, but it's better than fiberglass.
Originally posted by visionmax
I removed my pieces on the side. My suggestion is don't do it! It took me forever to fiberglass it in and to get it right finally. There is a valley underneath the rubber (the metal is indented inward) and there are holes periodically. There is also double sided tape. I will never do it again.
http://www.geocities.com/ericmilr30@...t/maxima1.html
I removed my pieces on the side. My suggestion is don't do it! It took me forever to fiberglass it in and to get it right finally. There is a valley underneath the rubber (the metal is indented inward) and there are holes periodically. There is also double sided tape. I will never do it again.
http://www.geocities.com/ericmilr30@...t/maxima1.html
11-27-2002, 12:46 AM
#24
Originally posted by visionmax
I removed my pieces on the side. My suggestion is don't do it! It took me forever to fiberglass it in and to get it right finally. There is a valley underneath the rubber (the metal is indented inward) and there are holes periodically. There is also double sided tape. I will never do it again.
http://www.geocities.com/ericmilr30@...t/maxima1.html
I removed my pieces on the side. My suggestion is don't do it! It took me forever to fiberglass it in and to get it right finally. There is a valley underneath the rubber (the metal is indented inward) and there are holes periodically. There is also double sided tape. I will never do it again.
http://www.geocities.com/ericmilr30@...t/maxima1.html
11-27-2002, 05:00 AM
#25
Junior Member
Join Date: Nov 2002
Posts: 24
Thanks man. This is only the first couple of times that I have posted on the org. I have been reading the sites since I got my max a year ago. Hey shadow, I saw you in greenville a couple of weeks ago. My car used to be tan when I saw you in Daytona.
11-27-2002, 05:13 AM
#26
Originally posted by funnylittlman
UNC,
That car is beautiful! I actually got to sit in the actual "KIT" from the 80's, back when I was 7, yea that was awhile ago. Does your dad have an operational "Kit" voice (a.k.a. Mr. Pheenie)? How 'bout buttons? Do any of them work? Oh man I would love a ride in that!
UNC,
That car is beautiful! I actually got to sit in the actual "KIT" from the 80's, back when I was 7, yea that was awhile ago. Does your dad have an operational "Kit" voice (a.k.a. Mr. Pheenie)? How 'bout buttons? Do any of them work? Oh man I would love a ride in that!
Thanks. My dad has put a LOT of time and money into that car. My dad has actual close up pics of one of the many cars used in the series. But each button will have a function for something.
11-27-2002, 11:57 AM
#28
Originally posted by funnylittlman
he should hook up some NOS to the Boost button!!
he should hook up some NOS to the Boost button!!
hahaha. thats what i told him but he said this ride is gonna be 'all show and no go'.
but every other button will either perform an action (i.e. trunk release, w/s wipers etc.) or say a phrase using the actual KITT voice aka Mr. Feenie. lolbut who knows what the boost button will do when I get the car.
11-27-2002, 08:22 PM
#30
...but does that happen anytime soon?
UNCDood,
If you need any help sportin the ride, this funnylil'man would be more than happy to help!
BTW, I showed the car to a bimmer friend, and he loved it too. He said he was going to put a thread on his forum. Not bad, havin a GM product on a Bimmer forum, and sayin good things about it! j/k
That car is awesome... MAD props to you and you dad
11-28-2002, 09:13 AM
#31
Originally posted by SuDZ
...but does that happen anytime soon?
SuDZ
...but does that happen anytime soon?
SuDZ
Originally posted by funnylittlman
lol SuDZ, you on a rampage man! J/K
UNCDood,
If you need any help sportin the ride, this funnylil'man would be more than happy to help!
BTW, I showed the car to a bimmer friend, and he loved it too. He said he was going to put a thread on his forum. Not bad, havin a GM product on a Bimmer forum, and sayin good things about it! j/k That car is awesome... MAD props to you and you dad
lol SuDZ, you on a rampage man! J/K
UNCDood,
If you need any help sportin the ride, this funnylil'man would be more than happy to help!
BTW, I showed the car to a bimmer friend, and he loved it too. He said he was going to put a thread on his forum. Not bad, havin a GM product on a Bimmer forum, and sayin good things about it! j/k That car is awesome... MAD props to you and you dad
thanks man, I really appreciate that. can you ask him to post the website address for the site of the car on there too? i'd really appreciate it.
oh yea, can you shoot ne a link sometime to let me know where he posted it at sometime?www.geocities.com/kitt_lab3
12-02-2002, 12:57 PM
#32
UNC,
here it is bud. BUT, you have to sign up for a bimmerforum username. It's ok, you can just wander around in there
http://www.bimmerforums.com/forum/sh...threadid=59116
-fnny
here it is bud. BUT, you have to sign up for a bimmerforum username. It's ok, you can just wander around in there
http://www.bimmerforums.com/forum/sh...threadid=59116
-fnny
Thread
Thread Starter
Forum
Replies
Last Post
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
magiconthetire
Audio and Electronics
2
10-26-2015 09:03 PM
trsandrew
Group Deals / Sponsors Forum
2
10-25-2015 02:47 PM
REDinLV
7th Generation Maxima (2009-2015)
4
10-18-2015 05:31 AM