Knock sensors universal?
#3
Originally posted by Zirafa
Bump.
Also, does anyone know why there is only one wire going from the KS? There are two pins on the KS and two pins on the connector. Is that normal?
Bump.
Also, does anyone know why there is only one wire going from the KS? There are two pins on the KS and two pins on the connector. Is that normal?
#4
Originally posted by Naujik
That's normal as far as I know..
That's normal as far as I know..
#5
When I measure the resistance to ground, I get about 2 Megaohm on one pin, and a open circuit in another. According to the Maxima guru's, this means the KS is okay. I still get a 0304 code from the ECU, and nothing else.
I haven't tried making sure there is continunity between the KS and the ECU. There could always be a problem with the wiring harness, but I think that is unlikely.
Good luck.
I haven't tried making sure there is continunity between the KS and the ECU. There could always be a problem with the wiring harness, but I think that is unlikely.
Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
my03maxima
7th Generation Maxima (2009-2015)
9
07-28-2024 07:40 AM
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
09-28-2015 09:01 PM
DC_Juggernaut
7th Generation Maxima (2009-2015)
4
09-28-2015 04:07 PM