Over the past few weeks I've pulled an 0304 code, and I have noticed my gas mileage kinda sucks. I was wondering what the part number was for my 95 GLE, or does it matter, and also how much is too much to pay for one? Thanks for the help.

 

OEM part # is 22060-30P00 but too expensive at the stealerships > $200
Get it at http://nissan-auto-parts-dealer.com for $124.70

 

try Ken at Jerry Rome nissan as well..he usually does pretty good on price...I got one shipped last year for like 125...but it was on special then...

 

auto-zone they want 260+tax
carquest 188+plus
orealy i went but the computer was down ;(

 

Thanks alot! Now I can prepare to have bloody knuckles ;-)

 

No bloody knuckles.
Use a telescopic magnet and an extension and a flex socket.
Honestly, I don't know how you would EVER get your hands in there.

 

I still got the marks on my knuckles from replacing the sensor two weeks ago. Ouch...

Pedro

 

[QUOTE]Originally posted by 95maxmadman
No bloody knuckles.
Use a telescopic magnet and an extension and a flex socket.
Honestly, I don't know how you would EVER get your hands in there. [/QUO


I can go to my local auto parts store and ask them for a telescopic magnet? WHat size extention and flex socket?? Thanks for the help!!

 

12 mm on the bolt size. I checked. Gonna have to do this myself this weekend. That's all I know.

 

Bolt is 12mm. The extension should be at least 14 inches. I used a 12 plus 6-inch added to it. I used the universal flex socket for the 3/8' drive, then attached the 12mm socket. A 17-inch telescopic magnet was used to removed the bolt and sensor. Here is a link that goes through the steps.

Knock Sensor Removal

I also removed the stock max intake. This made it much easier.

Pedro

 

Yeah, what he said.
Just make sure you don't do what i did.
While trying to remove the ks, i 'lost' the socket and flex joint. it broke
free of the extension. i got it out, but it took 30min. of swearing.