I know this has been covered, but couldn't find the thread.
The side clear corner is falling out, especially on the freeway, what are some temporary or permanent fixes so that it won't come out anymore.

Thanks

 

i got my glued works for me

 

i used clear scotch tape.

 

I used a piece of elctrical tape around the the plastic snap to tighten the grip on the metal stud.

 

I had this problem, i got madd and put a little silicone on the inside and the are in good, and they can be pulled out if you have to change a bulb or something only it alittle harder.

 

This's weird, but it works. Take the clear out and the lil white plastic thing out (the part that sticks into the bumper). Reverse the white plastic orientation and stick it on the clear...then re-insert the clear and push very very hard. This works so well, I can't even get the clear out! It's a free mod and very effective. Wish I had a pic, but they're pretty permanent right now.

Jae

 

i used a piece of napkin tighten the grip on the metal stud.
i had it for about 3 months now.

 

just loosen the stud part on the light housing about 2-3 turns and re insert works for me