4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Misfire code, but no CES light?

Thread Tools
 
Search this Thread
 
Old Nov 25, 2003 | 06:30 AM
  #1  
NmexMAX's Avatar
Thread Starter
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
Misfire code, but no CEL?

On my way home from work, the car started misfiring, somtimes does it when it's cold out, but usually goes away within seconds, now, it hasn't gone away in about 50 miles. I went home and checked the ECU for codes and got 0603, cyl #6 misfire, but I get no CEL, ( ghost code.) I changed the spark plug, and no difference. So my options now are either coil pack or injector, but the injectors seem to sound all the same, I sill need to check their resistance. Also, just to kake sure, CYl#6 is on the LEFT bank, correct?

Any help appreciated(I would've searched but, got a little anxiuos to wait until it gets back up and running)
Old Nov 25, 2003 | 09:11 AM
  #2  
NmexMAX's Avatar
Thread Starter
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
This has happened before when i was connecting my Harlan switch, I touched the hot wire with the rpm input signal, and it missed , then i turned it off, and it was fine, about 6 months ago. And recently I may have done the same while installing my Summit RPM switch, could this have fried my coil pack?
Old Nov 25, 2003 | 03:43 PM
  #3  
NmexMAX's Avatar
Thread Starter
dot dot dot ...
iTrader: (22)
 
Joined: Dec 2000
Posts: 34,576
From: Santa Fe, NM
? .
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sctludwig
3rd Generation Maxima (1989-1994)
8
Sep 1, 2022 01:32 PM
mvm062
Infiniti I30/I35
3
Nov 30, 2020 09:00 AM
Maxima30
5th Generation Maxima (2000-2003)
2
Sep 7, 2015 06:13 PM
MidnightMaxima_22
7th Generation Maxima (2009-2015)
6
Sep 6, 2015 01:18 PM




All times are GMT -7. The time now is 04:49 PM.