95-96 grille option
#1
95-96 grille option
i was thinking of cutting the black part of the grille out and putting a black/polished gutter guard style mesh in place of it. what do you guys think?
or an easier option. just take out the nissan emblem andput the mesh in front to cover up the holes/flat spot.
what do you guys think is the better option?
or an easier option. just take out the nissan emblem andput the mesh in front to cover up the holes/flat spot.
what do you guys think is the better option?
#12
you could go with the Pontiac grille... i mean Stillen's urethane grille, hehe!
I had this back in the day when i had a 95/96 front end and always was asked if my grille was off a pontiac
Stillen Grille:
or custom Mesh:
Ant
I had this back in the day when i had a 95/96 front end and always was asked if my grille was off a pontiac
Stillen Grille:
or custom Mesh:
Ant
#14
Guest
Posts: n/a
Originally Posted by ny96max
you could go with the Pontiac grille... i mean Stillen's urethane grille, hehe!
I had this back in the day when i had a 95/96 front end and always was asked if my grille was off a pontiac
Stillen Grille:
or custom Mesh:
Ant
I had this back in the day when i had a 95/96 front end and always was asked if my grille was off a pontiac
Stillen Grille:
or custom Mesh:
Ant
Cause if you don't cut it, you will still be able to see the old grill.
#15
i'd say cut out the old grill and put in mesh.
i got the one from grille-tech and i can still see the solid part where the emblem used to be. i dont think you can use the grille-tech stuff if you cut out the old grill entirely so you'd have to make the mesh insert yourself. as for me i'm going to try to cut out just the solid part where the emblem was to see if it makes a big improvement...
the pontiac grilles just make me want to
i got the one from grille-tech and i can still see the solid part where the emblem used to be. i dont think you can use the grille-tech stuff if you cut out the old grill entirely so you'd have to make the mesh insert yourself. as for me i'm going to try to cut out just the solid part where the emblem was to see if it makes a big improvement...
the pontiac grilles just make me want to
#18
Originally Posted by ny96max
you could go with the Pontiac grille... i mean Stillen's urethane grille, hehe!
I had this back in the day when i had a 95/96 front end and always was asked if my grille was off a pontiac
Stillen Grille:
or custom Mesh:
Ant
I had this back in the day when i had a 95/96 front end and always was asked if my grille was off a pontiac
Stillen Grille:
or custom Mesh:
Ant
#19
The lower pic shows the mesh wrapped over the stock mesh.... It actually came out perfect, but the only thing i didnt like about it is that you could see where the "nissan" emblam went underneath it. It dont matter now cause i have a 99 fron end on
Ant
Ant
#20
Originally Posted by 007max
the pontiac grilles just make me want to
...but then again, with the Stillen lip, fresh paint on the entire nose and matching lower mesh it didnt look that bad!
Ant
#23
I did it on mine too, dremeled out the middle of the factory grill and used a galvanized screen mesh from Home Depot. I like it but I'm looking into redoing it in the future and paint matching whatever it's gonna be with the car. See links below for pix:
http://images.cardomain.com/member_i...487_4_full.jpg
http://images.cardomain.com/member_i...487_5_full.jpg
http://images.cardomain.com/member_i...487_4_full.jpg
http://images.cardomain.com/member_i...487_5_full.jpg
Originally Posted by Max Noob
check my sig and my cardomain... i am one of the few who dremeled out the factory mesh and put in steel mesh.. painted black..i like it..
#26
mesh over fog light?? why.. i like the grill to be black.. i think any other color grill is ricey..
used dremel to cut out factory mesh
i used hi scratch resisteance truck bed paint, and clear coat from autozone to paint the homedepot mesh fencing.
used steel mesh "fencing" from gardening section of home depot.
used black plumbing glue a a couple mini black zipties to hold the grill on.
u can kinda see the radiotor if u look hard... but paint it black and no one can tell.. u cannot seet he hook release lever..
used dremel to cut out factory mesh
i used hi scratch resisteance truck bed paint, and clear coat from autozone to paint the homedepot mesh fencing.
used steel mesh "fencing" from gardening section of home depot.
used black plumbing glue a a couple mini black zipties to hold the grill on.
u can kinda see the radiotor if u look hard... but paint it black and no one can tell.. u cannot seet he hook release lever..
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
REDinLV
7th Generation Maxima (2009-2015)
4
10-18-2015 05:31 AM