sorry i have no search....well i want to install the factory fogs on my max. i was wondering if i cut out the hole for the foglights will it be like a plug/play installation i've heard that it is prewired and everything is there. would the foglights be a direct fit or do i have put sometihng to hold them.i know i have to get the new stalk with the foglight switch.

 

you should go like on e-bay and look for fogs from a 95-96 max SE and they should be the same as the hole about wiring i don't know if it's pre-wired u could still search the org but do it through yahoo or something it'll lead u to the threads anyways so u might wanna try that

 

what model do you have and what packages came with your car? my gxe wasn't prewired wholly but i wired them up. i had to go to a junkyard and get the plugs and bought the brackets and fogs through members here on the org.

 

my model is a gle

 

Hm, good timing on this thread... I just got in my kit from jerry rome nissan and I was wondering what wiring were there and what isn't. My car doesn't have the C&C package so I should be in the same boat as you. It seems as if the only major thing that I'm going to need is the plugs to connect into the h3 harness.

 

anyone know a definate answer

 

can anyone also tell me the parts i would need

 

look under your bumper and move the black plastic undercoating piece. if there are brackets on your bumper, squarish ones where the fogs would sit in, then you'd only need the fogs, relay, and the stalk (the headlight lever with the fog switch on it in the interior). if you don't have those, you need to pick those up too, the brackets. you should be prewired for them but i'm not sure about the brackets. the dealers sell kits but you can also get them from members on here.

 

how hard would this be to do basicly is just cut a whole with a dremel on the bumper then just put the foglights on the bracket then what about the wiring and the relay.the stalk should be pretty straight foward im guessing?