i looked at the vqpower how to ...one and that one i dont understand at all, is there any other web sites out there, or can som1 explain it a little better?

 

some one help?

 

did any1 do this, i have that chrome grill with the black plastic center?

 

i dont understand...what do you need explained better?

 

all i did was went to home depot and got the gutter mesh and then make sure you get some good wire cutters and then just cut away. Put a piece of cardboard on your grille to get a template and then cut....then use wire ties to hold it secure....hope that helps

 

I used cardboard, cutout the template I measured from the grille, rubberbanded the cardboard to piece of mesh, then trimmed out...heres a pic:

 

o so u take out the black plastic and just put in the mesh?

 

No no....you put the grille mesh over the black. You have to make a template out of cardboard of the shape of the black parts. Then cut out the mesh about the size of the template + 2" all the way around, and bend the extra 2" mesh 90 degrees to the template and start trimming to make it fit. Then use black zip ties to hold it

 

how did every1 find out how to do it?