after replacing a couple motors I would like to do 10 plus motor swaps anyone else?
#1
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
after replacing a couple motors I would like to do 10 plus motor swaps anyone else?
After pulling a couple of motors off and installing them back on the car it is a great challenge that I truly enjoy. To me this is fun, I love doing this ****. It calms my nervous or something. Anyone else with a shot motor would like for me to pull their motor? I live in Marrietta Ga. So far it took me right around 8-12 hours to complete the job. It feels good to pull that 400 pound broken VQ and installing another healthy VQ. The look on my face when it fires is priceless. I just got two more large snap on tool boxes since I am running out of space. But theres always space to pull a motor. I am about to order another motor to have as a spare.
5 speed swaps I about mastered those too. Just have to mess with two wires to get the back up lights to work. Tranny swaps are like air intake installs with a heavy 90lb thing full of gears. Between me and my younger brother we bolted just about everything on 96sleepers car w/in 8 hours. Bad thing is I had to leave so the axles were the only thing that did not get put in etc...
To encourage others, I started like all of you guys here on the org. Clueless as hell until I got ripped off by a shop. They charge me $500 plus dollars to lower my car. Oooh yeah. Another shop wanted $350 just to lower it. After those two shops I promised myself Id do everything on my own. Here I am. The only thing I somewhat nervous about is Nitrous. Got a kit w/a full bottle work on that some other day.
You guys let me know about pulling the motor. There are hundreds and hundreds of motors out there. just have to shop around!
5 speed swaps I about mastered those too. Just have to mess with two wires to get the back up lights to work. Tranny swaps are like air intake installs with a heavy 90lb thing full of gears. Between me and my younger brother we bolted just about everything on 96sleepers car w/in 8 hours. Bad thing is I had to leave so the axles were the only thing that did not get put in etc...
To encourage others, I started like all of you guys here on the org. Clueless as hell until I got ripped off by a shop. They charge me $500 plus dollars to lower my car. Oooh yeah. Another shop wanted $350 just to lower it. After those two shops I promised myself Id do everything on my own. Here I am. The only thing I somewhat nervous about is Nitrous. Got a kit w/a full bottle work on that some other day.
You guys let me know about pulling the motor. There are hundreds and hundreds of motors out there. just have to shop around!
#2
Originally Posted by JAY25
After pulling a couple of motors off and installing them back on the car it is a great challenge that I truly enjoy. To me this is fun, I love doing this ****. It calms my nervous or something. Anyone else with a shot motor would like for me to pull their motor? I live in Marrietta Ga. So far it took me right around 8-12 hours to complete the job. It feels good to pull that 400 pound broken VQ and installing another healthy VQ. The look on my face when it fires is priceless. I just got two more large snap on tool boxes since I am running out of space. But theres always space to pull a motor. I am about to order another motor to have as a spare.
5 speed swaps I about mastered those too. Just have to mess with two wires to get the back up lights to work. Tranny swaps are like air intake installs with a heavy 90lb thing full of gears. Between me and my younger brother we bolted just about everything on 96sleepers car w/in 8 hours. Bad thing is I had to leave so the axles were the only thing that did not get put in etc...
To encourage others, I started like all of you guys here on the org. Clueless as hell until I got ripped off by a shop. They charge me $500 plus dollars to lower my car. Oooh yeah. Another shop wanted $350 just to lower it. After those two shops I promised myself Id do everything on my own. Here I am. The only thing I somewhat nervous about is Nitrous. Got a kit w/a full bottle work on that some other day.
You guys let me know about pulling the motor. There are hundreds and hundreds of motors out there. just have to shop around!
5 speed swaps I about mastered those too. Just have to mess with two wires to get the back up lights to work. Tranny swaps are like air intake installs with a heavy 90lb thing full of gears. Between me and my younger brother we bolted just about everything on 96sleepers car w/in 8 hours. Bad thing is I had to leave so the axles were the only thing that did not get put in etc...
To encourage others, I started like all of you guys here on the org. Clueless as hell until I got ripped off by a shop. They charge me $500 plus dollars to lower my car. Oooh yeah. Another shop wanted $350 just to lower it. After those two shops I promised myself Id do everything on my own. Here I am. The only thing I somewhat nervous about is Nitrous. Got a kit w/a full bottle work on that some other day.
You guys let me know about pulling the motor. There are hundreds and hundreds of motors out there. just have to shop around!
Dave
#4
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by Dave B
I'm jealous. I'd love to learn how to pull and replace motor and trannies. I know it's not hard, but I'd like to have a bigger garage, Quik-lift, air tools, engine hoist, and a 3rd car while the other one is down.
BTW, did you install your turbo kit yourself?
Dave
BTW, did you install your turbo kit yourself?
Dave
oooh yeah, I installed my own turbo kit.
When I pulled my old motor I did not want to damage the good upper oil pan so I had to pull that one out. When I did my 5 speed swap I noticed my rear main seal was leaking. I had to grab the hoist to hold the engine while I pulled the upper oil pan out. Pretty scary been under there.
#8
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by BigJayx23
How much can u get a new vq for???
you can get any right here www.car-part.com
Model Description Miles Stock# Price Dealer Info
1998
Engine
Nissan Maxima 82up 190 all F1002003 $155 All Foreign Auto and Truck Parts USA-NE(Omaha) E-mail 1-800-323-2947
1995
Engine
Nissan Maxima 82up (VIN C ) 100K 175 ALL 00049933 $155 All Foreign Auto and Truck Parts USA-NE(Omaha) E-mail 1-800-323-2947
1995
Engine
Nissan Maxima 82up (3.0L) (VQ30DE) 95K 190 ALL 00059813 $155 All Foreign Auto and Truck Parts USA-NE(Omaha) E-mail 1-800-323-2947
1997
Engine
Nissan Maxima 82up cold comp not ran 180 all 00119864 $155 All Foreign Auto and Truck Parts USA-NE(Omaha) E-mail 1-800-323-2947
1998
Engine
Nissan Maxima 82up F1103010 $155 PRP - Hansen's Truck Salvage, Inc. USA-NE(Omaha) E-mail 1-800-228-2845
1995
Engine
Nissan Maxima 82up (3.0L) (VQ30DE) 95K 190 ALL 00059813 $155 PRP - Hansen's Truck Salvage, Inc. USA-NE(Omaha) E-mail 1-800-228-2845
1997
Engine
Nissan Maxima 82up 01203039 $155 PRP - Hansen's Truck Salvage, Inc. USA-NE(Omaha) E-mail 1-800-228-2845
1995
Engine
Nissan Maxima 82up 133k 1 YEAR WARRANTY CARFAX. 133K Y083 $150 Borges Foreign Auto USA-MA(Dighton) Quote 1-800-662-6150 Insurance-
these engines are for sale from Omaha NE. theres hundreds of others.
Jaime
#9
Originally Posted by JAY25
The only thing I somewhat nervous about is Nitrous. Got a kit w/a full bottle work on that some other day.
#10
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by 97blackSE
How about doing a tranny swap into my max....
I already have a 5 speed, but the POS is beat...
I want a new fresh tranny with an exedy!
I already have a 5 speed, but the POS is beat...
I want a new fresh tranny with an exedy!
You come here to Marrietta, you send me some pics of the parts you have. 5 spd parts can take up to 8 weeks to get in if they are out of stock or back order items. It has happened to myself and other members that live nearby. And if your serious you can email me.
Jaime
#11
I think for me........its like I know how to do, and have done it........but after you do a few....its like well for me anyways I would rather have someone else either help me, or do it for me. Not for simple stuff like mods, and what not.......but like on tranny chagnes etc. I would just rather have someone else do it. Then again that might be becuase I'm always so freaking busy.
Anywho....Jaime....coming up withing the next two months. I need to install a new clutch and I will probably do the fidenza flywheel as well. About how long do you think we could do it in?? Can we do it at your place?
-Jason
Anywho....Jaime....coming up withing the next two months. I need to install a new clutch and I will probably do the fidenza flywheel as well. About how long do you think we could do it in?? Can we do it at your place?
-Jason
#13
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by infinitiblast
I think for me........its like I know how to do, and have done it........but after you do a few....its like well for me anyways I would rather have someone else either help me, or do it for me. Not for simple stuff like mods, and what not.......but like on tranny chagnes etc. I would just rather have someone else do it. Then again that might be becuase I'm always so freaking busy.
Anywho....Jaime....coming up withing the next two months. I need to install a new clutch and I will probably do the fidenza flywheel as well. About how long do you think we could do it in?? Can we do it at your place?
-Jason
Anywho....Jaime....coming up withing the next two months. I need to install a new clutch and I will probably do the fidenza flywheel as well. About how long do you think we could do it in?? Can we do it at your place?
-Jason
a clutch install can take from 4-7 hours. I done it in 4 hours because it was freezing when I did that. Yea we can do it at my place. Hopefully we can fix up my garage since is cluttered. Them mid size snap on toolboxes should free up some space. Seems like my 75 gallon tank may have to go to make space for my bench vise
ABK whenever you are ready to do your 5 speed swap let me know and we can work something out
Jaime
#15
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by sk24iam
I only got 39k miles, I don't need a swap yet. Jay, have you ever attempted putting a 6 speed into a 4th gen?
that 6 speed tranny is very large and much more heavier then our tranny. It is also cable driven not hydrualic like ours. I am sure it would take alot work to get that thing to work. You also If I am not mistaken have to relocate your battery to the trunk. I changed a clutch on that 6 speed tranny and thats how I know. The starter is also located towards the front of the car.
link to the thread and picture links
http://forums.maxima.org/showthread.php?t=257002
http://images.cardomain.com/member_i...7_165_full.jpg
http://images.cardomain.com/member_i...7_166_full.jpg
http://images.cardomain.com/member_i...7_167_full.jpg
here is one of the cables
http://images.cardomain.com/member_i...7_168_full.jpg
http://images.cardomain.com/member_i...7_169_full.jpg
proper way to remove an axle without damaging it
http://images.cardomain.com/member_i...7_170_full.jpg
#16
Jay. Im definatley intrested in this with you.
Ive too been on carpart.com and Ive been considering a 70K 96' Engine but im reluctant Just B/C the 2000's are so LoW Mileage..
Anyhow. Are Engines & Trans Combos Easy to come by on this site as well. Id like to do both if we could. Ive been Searching for a Mechanic in my area do help out but Everyone has some Insane ideas for an engine swap.
I've Considered buy'ing an Extra Engine before replacing All O2 sensors and KS/ECTS/OilPress Switch/ Money money money. Yet a 70K engine costs $300.
Email me and lets talk about a price. Ive got 150k on eng & trans and lookin to do a swap the First of March or April depends on painting and weather though. kail63010@yahoo.com. Thanks Jay
Ive too been on carpart.com and Ive been considering a 70K 96' Engine but im reluctant Just B/C the 2000's are so LoW Mileage..
Anyhow. Are Engines & Trans Combos Easy to come by on this site as well. Id like to do both if we could. Ive been Searching for a Mechanic in my area do help out but Everyone has some Insane ideas for an engine swap.
I've Considered buy'ing an Extra Engine before replacing All O2 sensors and KS/ECTS/OilPress Switch/ Money money money. Yet a 70K engine costs $300.
Email me and lets talk about a price. Ive got 150k on eng & trans and lookin to do a swap the First of March or April depends on painting and weather though. kail63010@yahoo.com. Thanks Jay
#17
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by bobjohnson
Jay. Im definatley intrested in this with you.
Ive too been on carpart.com and Ive been considering a 70K 96' Engine but im reluctant Just B/C the 2000's are so LoW Mileage..
Anyhow. Are Engines & Trans Combos Easy to come by on this site as well. Id like to do both if we could. Ive been Searching for a Mechanic in my area do help out but Everyone has some Insane ideas for an engine swap.
I've Considered buy'ing an Extra Engine before replacing All O2 sensors and KS/ECTS/OilPress Switch/ Money money money. Yet a 70K engine costs $300.
Email me and lets talk about a price. Ive got 150k on eng & trans and lookin to do a swap the First of March or April depends on painting and weather though. kail63010@yahoo.com. Thanks Jay
Ive too been on carpart.com and Ive been considering a 70K 96' Engine but im reluctant Just B/C the 2000's are so LoW Mileage..
Anyhow. Are Engines & Trans Combos Easy to come by on this site as well. Id like to do both if we could. Ive been Searching for a Mechanic in my area do help out but Everyone has some Insane ideas for an engine swap.
I've Considered buy'ing an Extra Engine before replacing All O2 sensors and KS/ECTS/OilPress Switch/ Money money money. Yet a 70K engine costs $300.
Email me and lets talk about a price. Ive got 150k on eng & trans and lookin to do a swap the First of March or April depends on painting and weather though. kail63010@yahoo.com. Thanks Jay
#19
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by Tyrexx
I can see it now, Taking some friends on a fake road trip to GA, So that I can get my trans swapped. I wish.
you can have someone else do it for you locally
I never thought of flying out to install a SCer and clutch. You go figure. It was cold and fun though.
#22
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by Conrad283
Are you saying you could do a 5-speed swap in one day?
in one day , day & a half. I can complete 75% of it in one day. It is very very tight under the steering column. Thats what slows me down. I can do it in two full days not one as long as all the parts are available.
#24
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by Conrad283
Jesus ... That's impressive ... Should I drive 14 hrs down to Ga to get this done .. Hmmm decisions ..
If your serious let me know. You can drive down on Friday. Crash at my place all day saturday. By the time you resurrect from your deep sleep on saturday night the car should almost be done for sunday. I guarantee to have it done by noon that sunday. But Ill take you up on that challenge to complete it in one day as long as you have all the parts! Trust me I am always up for a challenge! Just let me know so I can schedule you and only you only for that weekend, I know I can strip that car in 4 hours, remember I wont be alone doing this. My brothers will be helping me. Thats why I bought 3 snap on tool boxes so they both have their own tools
#28
Originally Posted by Conrad283
Are you saying you could do a 5-speed swap in one day?
#29
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
If it was not for the hydraulic lines we would have set a record 11hours . That wont happen again, I promise myself that I was the test dummy for a 4th gen and my service advisor was the test dummy for the 5th gen. We have that under control
#31
did you guys go to school and learn all this stuf or did you just teach yourself. I'm 18 and thinking about going to an automotive technical college or something i love working on cars i wish i knew how to pull engines and trannys and stuff like that tho. i think it would be sweet to restore an old camaro or something along the lines
#32
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by slimer
yeah, you can come up to chicago to help me too
:P
:P
I called you but you too busy. I can help you out over the phone. I am way too booked to go over there. I have people trying to kill me with labor after 7PM. I mean I am human, but I need to spend time w/my kid and wife.
#33
no, its cool. I got that FHCS in the mail and it looks like it will work better than just having that arm dangle. Thanks for the help, but I dont have the new bracket yet anyway. We can talk later over aim-slimermax1
steve
steve
#34
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by fishpony
did you guys go to school and learn all this stuf or did you just teach yourself. I'm 18 and thinking about going to an automotive technical college or something i love working on cars i wish i knew how to pull engines and trannys and stuff like that tho. i think it would be sweet to restore an old camaro or something along the lines
I went to school for this for a year and a half. Got all As and a couple of Bs in my classes. Since I was a E-3 in the Marines, I was hated on big time. So I was sent off to the desert for training and I had to stop I stopped in 97 and started back again on my own in 99 after getting ripped off. From there one thing led to another. I highly encourage to you to get under the car physically and understand the motor components. If you dont youll be lost in class and its boring when you dont understand. Alot of the material now makes alot of sense to me.
I am a supply clerk Marine and went to school for it. There are professional mechanics that I work with in the Marine Corps and they dont dare do what I do. One of them is currently in school and I know more then he does. WHen I talk to him he starts to understand what I am saying to him breaking it down barney style. He did fail the Supercharger and turbocharger in portion in his class. Geez that would have been a breeze for me. Find the best school attend it and give it 110%, fix on any car you can and after a while youll become a bad azzz and everyone will want to have you around. My little brother is 15 and probably knows just about as much as I do. Hes catching me and surpassing me knowledge wise since he attends the classes with ASE pros at his school.
#35
Thread Starter
Supporting Maxima.org Member
iTrader: (38)
Joined: Dec 2000
Posts: 6,451
From: Near Archer High School, Ga
Originally Posted by slimer
no, its cool. I got that FHCS in the mail and it looks like it will work better than just having that arm dangle. Thanks for the help, but I dont have the new bracket yet anyway. We can talk later over aim-slimermax1
steve
steve
#36
yeah i need to learn more about engine and tranny parts and stuff, what would be the best way for me to learn? i want to find a crappy engine from a junkyard and just tear it apart and then tear apart a tranny but i don't think dad would appreciate that junk in his garage. what else could i do to to learn more?
#39
Jay 25, would you help me do a transmission/motor swap?? I live in Tx, and wouldnt mind driving over there with soon to be replaced 140k engine, for a lower mile engine. Plus change my auto to a 5spd. This would be in the summer thou, can you email me?? Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Finkle
4th Generation Maxima (1995-1999)
13
09-27-2015 09:53 PM
ffcbairn
Maximas for Sale / Wanted
1
08-16-2015 09:29 PM