Changed the 02 sensor but still need help
#1
Changed the 02 sensor but still need help
I bought a universal plug, and i have to soder it to the old wires...
There are 2 white wires and 1 black....on the stock wires. Are the 2 white ones the heating ones, and the black the info wire?
and does anyone have any tips on sodering cuz i tryed forever and couldent get the wires to stay together
Thanks
There are 2 white wires and 1 black....on the stock wires. Are the 2 white ones the heating ones, and the black the info wire?
and does anyone have any tips on sodering cuz i tryed forever and couldent get the wires to stay together
Thanks
#2
http://www.automedicsupply.com/walkeruniv.html
Have someone help you hold the wires in place while you solder. I had my mom hold everything while I was soldering while doing the blue window switches
Have someone help you hold the wires in place while you solder. I had my mom hold everything while I was soldering while doing the blue window switches
#3
Twist the wires together first, then solder. Get the wires plenty hot before applying the solder and it will flow.
My universal O2 sensors came with crimp connectors -- I used those. However, I solder lots of electronic connections!
My universal O2 sensors came with crimp connectors -- I used those. However, I solder lots of electronic connections!
Thread
Thread Starter
Forum
Replies
Last Post
sdotcarter
6th Generation Maxima (2004-2008)
2
09-02-2015 09:53 PM