phenryiv1

iTrader: (19)

https://maxima.org/forums/showthread...85#post3055185

I know that there are a LOT of links there, but I searched as best as I could. There are no difinitive answers (partially based on the nature of the "jackpot" code), but there is some information that you can use to self-diagnose.

If you have any info or contributions, please post them here. Questions welcome.

XoPtOn

iTrader: (2)

i had the code 0705 but then i reset it and the light hasnt turn on yet, is it supposed to turn on?

phenryiv1

iTrader: (19)

Sometimes you get a ghost code that stays off when reset, but typically the code will return if the problem is not fixed.

MaxedOutOfCash

i have the 0903 & still haven't found the problem.

phenryiv1

iTrader: (19)

For reference, do you mind posting what you have tried?

MaxedOutOfCash

sorry man...i got the 0111 code...i didn't think twice before I posted. 0111 is the "the jackpot code" . . .if you want me to post some things i checked on that, let me know...

Gen8888

I'm getting the 1008 Code which is the EVAP canister purge volume control valve. This code is setting off my knock sensor and BARO/MAP sensor as well. But after resetting the ECU, the Baro/Map has not come back, just the knock and the EVAP. I found out the part number for this so i hope this fixes the Code but I know its not the same part you guys are looking for. Goodluck with yours.

Gen8888

Quick questions. Do you guys know why my EVAP Canister Purge Volume Control Valve is metallic and others is plastic? Could it be that there is a difference between Cali-spec and Fed?

Andy

phenryiv1

iTrader: (19)

There are a few jackpot codes- go ahead and post your code and what has been tried.

phenryiv1

iTrader: (19)

I get all of the names of all of the components mixed up- which component are you referring to, and where is it located?

Gen8888

EVAP Canister Purge Volume Control Valve. If you start from the 3rd to last letter of the VIN number which is stamped into the firewall, it is 3-5 inches towards the radiator. It has 2 hoses and a electrical harness. It is the Valve in picture A from this site. http://www.jcn.net/mwest/evappage.htm

phenryiv1

iTrader: (19)

Oh, I was thinking that you were talking about the EVAP Canister Vent Control Valve, which is at the rear of the car...