4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Did the self Diagnostic test.... results inside...

Thread Tools
 
Search this Thread
 
Old Apr 3, 2001 | 04:16 PM
  #1  
diesel9119's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2001
Posts: 385
Okay, here goes. did the self test on my car. here is what I came up with.

Error codes 7,5= EVAP CONTROL SYSTEM
9,3= EVAP VENT CONTROL VALVE

DOES anyone know what exactly this system is, and what it entails in fixing? PLEASE help!
BTW, the self diagnostic test was super easy by Daniel's instructions. Thanks again Daniel for the amazing help! Hope to get this squared away as soon as possible.

Thanks,
-Randy
Old Apr 3, 2001 | 05:31 PM
  #2  
diesel9119's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2001
Posts: 385
sorry, i apparently cut right to the chase, and didn't open my eyes. I should have looked below.
Old Apr 3, 2001 | 08:14 PM
  #3  
bdogg88's Avatar
Senior Member
 
Joined: Feb 2001
Posts: 113
Originally posted by diesel9119
Okay, here goes. did the self test on my car. here is what I came up with.

Error codes 7,5= EVAP CONTROL SYSTEM
9,3= EVAP VENT CONTROL VALVE

DOES anyone know what exactly this system is, and what it entails in fixing? PLEASE help!
BTW, the self diagnostic test was super easy by Daniel's instructions. Thanks again Daniel for the amazing help! Hope to get this squared away as soon as possible.

Thanks,
-Randy
EVAP is your Emitions Vapors... I'd just reset the comp and see if it goes away.
Old Apr 3, 2001 | 08:18 PM
  #4  
diesel9119's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2001
Posts: 385
thanks bdogg, i reset it earlier tonight, figure i'll let it go for a few days, then let the light decide what it wants to do.
thanks for the reply.
-randy
Old Apr 4, 2001 | 04:02 AM
  #5  
bdogg88's Avatar
Senior Member
 
Joined: Feb 2001
Posts: 113
Originally posted by diesel9119
thanks bdogg, i reset it earlier tonight, figure i'll let it go for a few days, then let the light decide what it wants to do.
thanks for the reply.
-randy
If it keeps up it could be O2 senosrs.. I forget everything else because I haven't seen that in a while. Either way, if you have 2 o2 sensors make sure that you don't cross the wires or the car will never run right. One at a time. Always leaving one ine. Take out the right, replace it. Take out the left, replace it. That's if you have 2. And that's if and only if it keeps causing a problem. Good Luck.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TallTom
5th Generation Maxima (2000-2003)
57
Oct 14, 2025 05:16 PM
BPuff57
Advanced Suspension, Chassis, and Braking
33
Apr 16, 2020 05:15 AM
mkaresh
8th Generation Maxima (2016-)
21
Mar 12, 2018 06:48 PM
hez8813
5th Generation Maxima (2000-2003)
0
Sep 27, 2015 08:37 AM




All times are GMT -7. The time now is 11:24 PM.