Dave H.

iTrader: (5)

Hey guys and girls,
I am interested in putting on the usual body styin products, stillen front lip, side skirts, and rear bumper. But i have some concerns that just came to mind. I was getting my tires rotated yesterday, and at LesSchwab, they have lifts that you drive up and over and then it lifts up the whole car. They don't have the lifts that have swing arms. Hard to explain, and no i don't have pics.
I guess my concern is, Has anyone had trouble with their kits while they are getting their cars worked on? Any damage occur?
sorry if it isn't too clear, maybe some one can help explain better.....

Thanks.

BlackCat

iTrader: (6)

Some shops will tell you up front if they'll have problems with your car's body kits. Always ask in advance. There was one time something didn't clear properly and my side skirt flexed but nothing cracked, not even the paint.

JeffesonM

iTrader: (5)

The bottom of my Stillen lip is scraped to ****, but other than that no big deal. It's urethane so it will just bend, not crack, unless you do something real real nasty to it.

MSmax96

haha everytime i have to go anyway or do anything with my car i have to be concerned about the road speedbumps inclines ect.
but jus like jeffesonM my kit is urethane so it jus has abunch of scratches that u cant see. i have the skyline kit not stillen

Dave H.

iTrader: (5)

Yea, i know about scraping on road surfaces, i am concerned about when the car goes in the shop or gets worked on. Will i have trouble getting it worked on due to the kit? Or am i just worrying too much?

95nissanMax

yea i had a fiberglass skyline kit and drove up on a ramp scrapped hard core goin up jus on the bottom. then we didnt like that idea and went to go to use the swing arm lift and the kit caught on the ramp and pretty much ripped the right corner off of my kit. not good! and i WASNT LOWERED!

MSmax96

about getting ur car worked on......you basically have to lay down ramp(wood or whatever) and rive ur car onto the lift at a less extreme angle. If u do that u should have no problem. I have also found that going backwards works to(though most places dont like to do that)

MSmax96

ride ur car*

JeffesonM

iTrader: (5)

Mine scrapes on some lifts too, but like a said, no big deal with the Stillen lip.

bigleman

iTrader: (4)

the only problems i've had, is Midus busting out my neons after telling them 3 times to watch out for them, but when i was in my wreck, stillen kit was perfect until the tow truck got there then he rammed it under the front wheels of my car. the body shop says all they have to do is repaint...

kormax97

haha welcome to my world...

my car isn't even dropped yet and it touches anything even slightly inclined.

i always take my car to wherever they have those arms that have the thing at the end so it'll lift up the car without touching my sideskirts.. oh and I can't get on those ramp lifts.

DrTySOUFMaX23

iTrader: (6)

i gotta kit and my car is dropped and trust me i scrape like a ****...sumtimez!!

Dave H.

iTrader: (5)

thanks for the comments and replies. keep the tips coming...

Dave H.

iTrader: (5)

Just thought of another question related to this...

How much closer to the ground do the side skirts go from stock? I know ride height depends, i am on h&r springs. does anyone have that setup and would be willing to check. Thanks in advance. You people rock!

TriniRicanPapi

The side skirts probably add about 2 to 3 inches depending on the side skirts you get.

kormax97

My side skirts ends about 1 inch below where the metal part is. (frame part where you would use your jacks to raise up the car) I think that's normal... so you get the idea..

sagamax

iTrader: (5)

i am 5" off the ground and i scrape on some lifts but its a stillen kit so no biggie. the bottom of my front lip has no paint at all