Where can I get the Clear Markey turn signals that many 4th gen owners have on the side of their cars?

I know install process is dill whole and run wires to power the light off the turn signals but where can I get some decent ones dirt cheap.




thanks

 

Autozone or the likes typically carry them.

 

didnt know that. know a price off the top of your head?


they have all kinds like clear outside, colored buld inside?

 

I think roughly $10-$15. The wires provided usually aren't long so you might want to purchase wires while your at it.

Just look in the aftermarket section, where they sell multi-colored cone filters, colored bulbs ect...

 

I have a 100feet of wire in my room so that wont be a worry. Thanks I'll check it out tommorow, when I also pick up some oil for my oil change.

 

and for drilling is it true if putting a strip of Masking tape down help?

dont want to jack up my paint, it wont be seen but still.

 

at autozonr they usuually run about $20. i got mine from there.

 

Kool I was thinking of your in my head, they looked sweet when I saw them.

where do I located the wires to hook them up to?

 

Noob questions just get better and better. Soon they'll be asking us where to buy gasoline and if it's available on ebay.

 

Was just asking real quick while I was getting quick responces.
Man whys the 4th Gen section so sensitive?


And most "noob" question have an answer in the how to's. Show me a link and I shut up.

 

If you need a HOW TO to show you how to drive to a store or how to type EBAY in your address bar than I guess this question is valid.

 

a person with almost 3k posts can hardly be called a noob. if he's a noob, what does that make me? i don't even wanna know

 

Well, I haven't seen you act like a newb or make posts like this so you're fine, for now.

 

Some people have gotten them from other cars that come with them stock, hence my question where people got them from. Why try to buy them on ebay when for simply products like this they rape for shipping?

I mentioned the how to section for where to find the wires for the turn signal, as that became my question a pst or two ago.

sheeesh . . . you ask one question that you dont know but everyone else seem to know, and you called a "noob" put it in the stickes. Sheesh


And I know this is my first "noobish" question cause I usually sit back and watch other ask it for me, and soak up the knowlege.

 

I wasn't responding to the wire location question. You just splice into the blinker wires since they are pretty much only a foot or 2 away. Get a multimeter, that will save you tons of questions you might have later on about many things.

 

thank you. were are the blinker wires? down by the fuses, I dont know where they are thats all I need to know.

 

Post pics after you do this mod I'd like to see how it turns out!

 

You could tap into the relay box if the blinker relay is there, can't remember off the top of my head. I think it would be a lot easier to just splice directly into the blinker wire coming off the bumper blinkers, running it along the wheel well, inside engine bay, to behind the fender.

 

no pics no good no good no pics

 

still havent done it yet, should be getting to it this wednesday, as I will be changing my oil and such getting ready to ride up to ATL! (again)