18x7.5 with offset 48... will they fit?
#1
18x7.5 with offset 48... will they fit?
hey all, i just got some rims off ebay but they sent me the wrong rims. i ordered 17x7 with offset 40 but they sent me 18x7.5 with offset 48. does anyone know if these rims will fit my 98 maxima? thanks.
#2
Senior Member
iTrader: (7)
Join Date: Dec 2004
Location: Alexandria, VA, & Central Jersey
Posts: 2,647
why don't you get up and stop being lazy and put them on!!!! they prob do'nt have tires, but you can still see if the rim is going to hit anything like the control arms, etc. etc. If you they do fit, and you have extra cash laying around, you lucked out in a way. but lemme tell you that tires are much more expensive for 18's than 17's. approx $60 more on each tire. so $60 x 4 is another $240 you woulda saved if you went with 17's instead of 18's
#3
Originally Posted by ImmaSquashYou
why don't you get up and stop being lazy and put them on!!!! they prob do'nt have tires, but you can still see if the rim is going to hit anything like the control arms, etc. etc. If you they do fit, and you have extra cash laying around, you lucked out in a way. but lemme tell you that tires are much more expensive for 18's than 17's. approx $60 more on each tire. so $60 x 4 is another $240 you woulda saved if you went with 17's instead of 18's
#5
Senior Member
iTrader: (7)
Join Date: Dec 2004
Location: Alexandria, VA, & Central Jersey
Posts: 2,647
sorry, didn't mean to sound like i was bashing on you. sorry if you took it the wrong way. but it should fit without a problem. if not use spacers. but i'm pretty sure that they will fit...but you can still open one of the boxes and just put them on your car to check if it does fit correctly
#9
Originally Posted by 1FSTMAX
i have 48mm offset wheels.. they fit fine.. no rubbing or anything..
just want to make sure cause ebay seller is not responding... thanks
#10
Originally Posted by kormax97
I have 18x7.5 +45mm offset and it fit fine. only had little probablem with the center cap on the rear cause of the grease caps but i fixed that problem very easily. ![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
#14
Guest
Posts: n/a
Originally Posted by Supermax95
With a hammer and chizel?....= ]
Originally Posted by 1FSTMAX
or a 5mm spacer..
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
#15
Originally Posted by kormax97
that's a no no.. that grease cap is there for a reason. never remove it.
i tried with a 10mm spacer but still wasn't enough space!! and plus the lugs were barely staying on so i took them off and did this... take the nubs off the center cap and super glue it on to the rims
it's been on past 2-3 months now and it's waaaay better than having no center cap ![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
i tried with a 10mm spacer but still wasn't enough space!! and plus the lugs were barely staying on so i took them off and did this... take the nubs off the center cap and super glue it on to the rims
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
trsandrew
7th Generation Maxima (2009-2015)
17
04-08-2016 06:45 PM
trsandrew
Group Deals / Sponsors Forum
2
10-25-2015 02:47 PM
Pied
4th Generation Maxima (1995-1999)
0
09-26-2015 03:29 PM