I have Tokico struts with H&R springs sitting on 18 ADR Stage II's. I really need a front camber kit. I tried searching the net, i get weird stuff like Northstar 14mm Magna Cam Kit, or NAPA 14mm Magna Cam Kit. Some sites sell Cam Adj. Plates - but those are in the $300's. Progress has a cam adj. kit for $75.

I don't know what the best cam kit for this car is since i never used one before. anyone hook me up with some info on cam kits and where i can get one soon please. Thanks.

 

Why do you need a camber kit with an H&R drop? Have you gone for an alignment and told you cant get within spec?

You should be able to get within spec with H&Rs if not something is wrong or bent.
You can get camber bolts at tirerack.com they have one camber bolt to get you +/- 1 degree of camber and they have one for +/- 2 degrees of camber.

 

i would also like to be filled in on this....i got s-techs with some camber

 

S-tech are more likely to need camber bolts than H&R. S-tech have a very low drop which can make it harder to get within spec. H&R shouldnt have this problem.

tirerack has 3 kinds of camber bolts for our cars. 1 for $10 a pair ( 1 degree of camber), 1 for $20 a pair (2 degrees of camber, another for $25 a pair (street and auto crossing camber bolts)

 

I went for an alignment, and the guy suggested some camber kits to minimize the tire wear as much as possible. right now the camber reading is:
left front is -1.33
right front is -0.94
He had suggested the Magna 14mm kits.

thanks.

 

i have 2 pairs of +/-2 degree bolts i boutgh when i dropped my car. ended up not needing them. THey are the Ingalls from tirerack. New in box never used, 20 shipped a pair that saves u shipping costs from tirerack.