noise after axle install
#1
noise after axle install
this was about a month ago when I put in my raxles. I went with them because of all the positive things I read about them. anyway, at times I have to really turn my wheels to get into a tight parkign spot. I don't know if it's clicking or creaking, but the sound only occurs about a turn before the bumpstops. What suspension part is making that noise? I highly doubt its the axles, since it's raxles, but just wanted to make sure.
#2
Check to make sure all the suspension bolts are tight tight. I tightened the two lower strut housing bolts and my clicking went away. If it's more of a squishy/rubbery/creaking sound, it might be your strut mount insulator. I know mine need to be replaced.
#3
What's a raxle?
I had a horrible sound from my front suspension. I had creaking and clunking. I replaced an axle with little or no effect. I tightened my hub nut to 200 lbs and the noise went away. It was only off by a tiny amount but it made the difference.
I still get other creaks from the suspension. I'll have to try tightening everything in the spring when I replace my struts.
I had a horrible sound from my front suspension. I had creaking and clunking. I replaced an axle with little or no effect. I tightened my hub nut to 200 lbs and the noise went away. It was only off by a tiny amount but it made the difference.
I still get other creaks from the suspension. I'll have to try tightening everything in the spring when I replace my struts.
Thread
Thread Starter
Forum
Replies
Last Post
boomerbrian
5th Generation Maxima (2000-2003)
4
11-08-2015 05:10 PM
Starrider
3rd Generation Maxima (1989-1994)
4
09-17-2015 07:26 AM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
08-19-2015 08:20 PM
kirkhilles
5th Generation Maxima (2000-2003)
2
08-08-2015 10:53 AM