4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

5spd swap info

Thread Tools
 
Search this Thread
 
Old Jan 12, 2006 | 10:20 PM
  #1  
InsneDrmr's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Feb 2005
Posts: 617
5spd swap info

So Ive done quite a bit of reading about the 5spd conversion....but I dont think I wanna tackle this job myself. I know of a really good place by me that does transmissions and Im tempted to bring it there if I decide to do it. How much do you think it would cost for a shop to do a transmission swap from an auto to the I30 tranny? And dont tell me "too much"...I know that already.
Old Jan 12, 2006 | 11:03 PM
  #2  
darklegend06's Avatar
Senior Member
iTrader: (11)
 
Joined: Nov 2004
Posts: 1,358
From: Miyazaki, Japan
You need all these parts and I calculated it to be around 1000+ without the trans.(Parts all New) The trans it self would be 600-3000 depending on where and what condition the trans is. PLUS LABOR the most pricy part of the whole thing.(my opinion) So guess around 1600-4000. Mostly depends on where you buy all the parts from. Good Luck with it Hope it works out.

Parts Needed:
5spd tranny (try and get the I30 LSD or Canadian Maxima LSD if possible – doubt it)
Both Manual drive shafts (if you have ABS you need specific ones, if you don't have ABS you can use ABS ones)
1 clutch kit (clutch disc, pressure plate, throw out bearing)
2 shifting rods (support rod + control rod) (acquire used w/ all the hardware)
Return spring (connect to the 2 shifting rods (Buy this new, the stiffer the tighter your shifter feels)
1 5spd starter
1 shifter (Acquire used to get nuts and bolts (buy with the shifter rods)
1 shifter console piece (interior)
1 shift consul bracket (Replaces your auto one) (interior) (dealer name plate bolt and transaxle hole cover)
1 brake pedal
1 clutch pedal
1 master cylinder
Hydraulic lines for clutch
1 slave cylinder for clutch
1 extra set of tranny harnesses (might come w/ 5spd tranny)
1 18ga wire and wiretaps
Assorted cotter pin set.
1 Manual Fly wheel
1 Manual motor mount
Tranny Fluid (GL-4 or redline is preferable)
Locking pin and clip for the clutch pedal to the master cylinder (you could bend a nail but I would go to the dealer and pay $4)
2 nuts that fit the threads on the clutch pedal.
1 bolt that bolts in the top of the clutch pedal (the dealer can find it's size for you)
1 bolt that connects the control rod to the tranny (the dealer can find it's size for you)
1 Haynes Manual just in case you need extra help

I'm only 18 still so the prices are little sketchy.
Old Jan 13, 2006 | 07:54 AM
  #3  
Dubbya's Avatar
VK56 Inside
iTrader: (16)
 
Joined: Apr 2004
Posts: 3,386
You should have Tilley do this for you. I dont think hes that far from NY IIRC. Most places will tax big time because they are not going to be that familar with the Maxima.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BobTX10
8th Generation Maxima (2016-)
14
Oct 7, 2015 08:43 AM
ef9
4th Generation Maxima (1995-1999)
10
Oct 4, 2015 08:43 AM
fx4five
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
0
Oct 1, 2015 04:58 AM
worldwiderecognized
6th Generation Maxima (2004-2008)
0
Sep 30, 2015 01:16 PM




All times are GMT -7. The time now is 12:43 AM.