dmontzsta

iTrader: (8)

I received my Cattman catback on Friday. First off, Brian is on top of his stuff. For those who have done business with him, you might already know that. He answers the phone and any questions you might have. Also, he does not try to twist your arm to buy anything. When I first got my exhaust, I was in love. The quality of the welds and the metals was great. The tip was a little too big for my taste, but once on the car it was great. I love it, it is not too big and not too small, they did a great job choosing the size on this. The entire exhaust system first in the trunk, I was able to get all 3 pieces in my trunk and I have a subbox and two amps. Here are some pics of the exhaust un-assembled.





I am EXTREMELY picky about everything. When I was searching for an exhaust, I wanted quiet. I am getting a bit older and have a family, I do not like the attention of being a "boy racer" any longer.
It was difficult, I could not find a good flowing, stock sounding and looking exhaust. I must admit all the prices of the higher end exhaust were scary. But, I know what a $300 catback from a muffler shop can be...here are the pics of the one off my car.




continued...

dmontzsta

iTrader: (8)

So it is now on. The sound is incredible, it is VERY close to stock with a little tone. When I am cruising around town there is no sound. When I drill the gas, I get all intake sound, with MILD exhaust. This is just what I wanted. Every car is a little different, so I used hose clamps around the hangers as suggested. I was able to get it lined up perfectly, just how I like it. I am now very happy. My mission of being stealthy is still on going, but this has REALLY helped.

Here are the final pics of it mounted.







Thanks again Brian. I apologize for being a pain in the ***, but I am extremely picky. You handled all my needs well, good job.

nexgenmax

iTrader: (14)

very nice....great look too from the back.

DarkScorpion

Would it be possible to see pictures of the hoseclamps? I'm having trouble visualizing what you're talking about.

Fr33way™

iTrader: (23)

Tightening hose clams AROUND the exhaust hanger to pull it tighter.

There is a pic in another thread around here somewhere.

Black Maxima

I really need to take a picture of my hose clamps. I used that method and it worked very nice. Nice exhaust by the way.

njmodi

iTrader: (4)

The cattman setup looks very nice. Keep it shiny

4x4Max

iTrader: (12)

Your car is so clean! What type of wheels are those?

Nismo

iTrader: (18)

Is this catback stock configuration? Meaning that the Cattman b-pipe bolts up with the factory muffler and vise-versa?

dmontzsta

iTrader: (8)

nexgenmax: Thanks for the compliment.

DarkScorpion: I will try and take some pics. Basically, the hose clamp goes around the outer diameter of the rubber hanger. It looks pretty nice too.

Black Maxima: Thank you.

njmodi: Thanks. I need to find a good polish for it. I do have some small scuffs on top, which are driving me crazy. When I was lining it up, it rubbed the bumper.

Anyone know what I should use to get them off?

4x4Max: Thank you. They are 18x8.5 PCW.

Nismo: I am not sure, maybe Brian will come on and answer that.

Puppetmaster

iTrader: (48)

Like this?



I've done this for all my rear sections and its worked great so far.

dmontzsta

iTrader: (8)

yup, that is exactly it...it is like having adjustable exhaust hangers. I am waiting for the people to hop in and say it effects the hangers or something stupid.

njmodi

iTrader: (4)

Actually that hose-clamp is a great idea.. I need to do that too...

7/94 95 Max

Do you also have a y-pipe on your car. Either Stillen or Catman...I have a Stillen on mine and am looking for a nice exhaust like yours. I am also concerned with the noise. If you do have a y-pipe the sound is still close to stock? Great pics by the way...set up looks awesom.

dmontzsta

iTrader: (8)

I have an older style WSP Y-pipe and WSP cat.

99grnmaxgxe

iTrader: (11)

Yeah, representing Tucson to the fullest!!!!

Nismo

iTrader: (18)

Do dont happen to plan to record a sound clip would you?

blackmaxx96

iTrader: (23)

Oh man!!! I'm definitely doing that with my exhaust hangers... Can't believe I haven't thought of something like that before...

dmontzsta- Your car is lookin hottttttt.

Mike

dmontzsta

iTrader: (8)

Thanks. I have been sort of de-modding it, for better mods.

I am all about trying to go STEALTH. Just need some stock tails now.

NightRider

iTrader: (6)

Allow me to be the one to say something, but it's definitely not stupid. You are going to notice that your exhaust hangers are going to wear out alot quicker than normal by doing this. I was doing it for years, so it's nothing new. By you saying what you said, it only tells me that someone has already warned you about the effects of your "mod".

98MistSE

I have the cattman catback and absolutely love it as well. When I first installed the exhaust with the stock hangers, nothing lined up properly. I figured it was because the hangers had over 120,000 miles on them. I bought 6 of the nismo solid exhaust hangers from Courtesy Nissan and put them on. When installing them, I loosened (NOT removed completely) all the exhaust bolts from the cat back. I then put on all the hangers and finally, aligned the exhaust where I wanted it in the opening and one by one, tightened up the bolts. The exhaust fits perfectly now, with no bumping the frame where it goes over the rear axle.

They are a little pricey but, here's the link: Exhaust Hangers

Chris

DarkScorpion

Ah, now I get it. Thanks alot! And nice car, btw

Dougster

Looks like a great quality unit.
Enjoy her!

dmontzsta

iTrader: (8)

It is definately not stupid. But, exhaust hangers are pretty cheap and easy. If I had to replace them in 2 years? it would not be a problem. One way to look at it is, I bet they last longer than tires.

99SEmatic

iTrader: (4)

Hey d, how about I trade you my stock tails for your red/clears?

dmontzsta

iTrader: (8)

That sounds like a deal to me. Mine do have a chip and are homemade though. Dont know if you are still interested.

99SEmatic

iTrader: (4)

Would be interested although my right outer has a small crack in it.
Just let me know.

blackmaxx96

iTrader: (23)

Why get rid of the red/clears??
They give a very clean, factory look to the car in my opinion...
What are you plans with the car?? "better mods"........sounds good to me :-D

1FSTMAX

iTrader: (29)

looks nice donald.. orange corners, and exhaust looks pretty good.

did you take those pics in the high school parking lot, across your street?

1FSTMAX

iTrader: (29)

yes, it will..

LudeAEM

orange corners +1 haha. You sound exactly like me when picking out products. It has to be jsut right, and (even though i'm not getting one on my car because its automatic) when i heard the cattman i was really impressed. The ONLY exhaust i would get for my maxima.

dmontzsta

iTrader: (8)

No, it looks too much like a honda civics tails. I think the orange will give it contrast and the orange is stock. My plans are still the same, a sleeper. The Nissan Maxima is a sleeper, it always has been. If someone sees it all riced out, they will think it is modified. If it is near stock, drop, rims, etc...they are less likely to think anything of it. Plus, it gives is a classy look. Also, this car has always had the cheapest performance mods, so I am slowly replacing them with better parts. Like the ****ty cat-back vs. the high quality Cattman piece.

dmontzsta

iTrader: (8)

Thanks Alfonso. Yes, that is right there in the big lot. I drove past your brother coming back, he was driving off Pattilynn onto Cottonwood.

Dubbya

iTrader: (16)

That exhaust sure looks pretty. Nice buy!

JClaw

iTrader: (17)

I love that catback. I bought everything from the headers to the exhaust tip from him and I don't regret it.

Lumberg™

iTrader: (6)

anyone have sound clips of the catman...don't think I remember seeing it in the sound clip post

dmontzsta

iTrader: (8)

I have some I took, but it would kill my server to post them. If you would like me to send them to you, let me know and I can email it. They are pretty large though.

MaximaSE96

iTrader: (8)

whats up with the 02 bung and stuff near the front of teh resonator....it doesnt extend all the way to the cat...u have to bolt it to the ***** looking pipe with o2 bung

dmontzsta

iTrader: (8)

huh? run that by me again?

It bolts in the stock location.

MaximaSE96

iTrader: (8)

u think for all the money u pay for it the resonator would extend all the way to the cat eliminating the lil 5" section of pipe that has the 02 sensor