that pink wire says "IN INT"...i dont know what it's for, it wasn't necessary for my application

the package comes with directions, but you will probably find my pic more helpful

 

k i mean i know to wire all that so i should be good to go ill post tomaro on results might even make a how to if i get into it enough

 

ok yea i need help i hooked it all up and no power no nothing I dont understand

I have a 12 volt and a 12 volt constant coming from my pioneer wiring now the nissan wiring i have theres 2 plugs with a ground to frame on each and one has a ground to/from amp cant remember what do i do with these i figured you hook all the positives together and all the negatives together but that didnt work so i hooked it straight to the battery it turned on had all the wiring hooked up and no sound out of my speakers what am i doing wrong?

 

1. did u turn the screws on the scosche adapter as shown in the diagram?
2. did you set the adapter to "factory amp" setting

 

cuz u mentioned ur unit powers on, u just dont hear,..those 2 things i mentioned are the first things to try, cuz i had the same problem

 

turn what screws which way and i have it at factory amp also i ahd a blue wire /w white trace left not done i dotn knwo what im doing ill go take a picture

 

above and below wehre it says "SCOSCHE" on the adapter, there are 4 holes on each side...stick a screwdriver in the hole and turn it to the appropriate direction

 

EDIT: ****ty pic let me take another also look at the harness i have to plug into stock its a bit weird

 

heres my wires that arent connected coming from nissane harness

Black |white tracer amplifier ground
2 black chassie grounds had those hooked up to my one from pioneer harness
orange illumination <dont think i need anyways>
blue power antannae
red 12 volt ignition switch
yellow battery constant <had the red and yellow connected to the red and yellow from pioneer harness
rest are speaker wires

 

ok the blue with white tracer is the RMS thing for the amp cause theres one coming from my pioneer harness and i know that so if i hook that to the one on my radio it will turn them on right because my amp in my trunk wont turn on unless thats hooked up

 

1. walk out the door during some free time
2. get in car
3. push in the clutch
4. begin shifting and moving
5. get on the interstate
6. drive to saint petersburg
7. get out of car
8. knock on my door
9. we take out old speakers and head
10. we replace with new ones and finished.

 

haha well hell why didnt you say something thurs i was in st pete kinda got lost going to mosi and ended going over bridge but yea

 

i wish my dad would do that for me

 

where'd you get that harness from? i had gotten a similar working one from walmart, it didnt work..when i got the one from best buy which has a different design, it worked..

i dunno why it didnt work, but dont worry, u can return it..just put it in the box, walmart accepts anything

 

I have it finished my problems were

1. The nissan harness didnt have a true ground so had to make my own<got me power>
2. Didnt have the RMS to the bose amp hooked up<got me sound to speakers>

I will take pictures tomaro thank you so much for all of your help

 

good to hear that, congrats on gettin it workin

 

yea jsut one minor problem. I cant get my amp to work the lights goes from greent o red and it states a short circuit int he output lines is that possible? I unhooked them from amp to speaker same so it says ground where are you guys puttign your ground wires at?

 

hi/low convertor works like a charm! stay away from best buy there service is C*rap when compared to Future Shop in Canada and i though Future Shop was bad man i love Future Shop now for returns especially LOL ( which are now the same owners)

Good luck with the install!

 

I got my headunit put in for $75.

 

Because the Bose system has individual amplifiers for each speaker all you need is the $80 converter wire harness they sell for Bose systems to hook into the back of your unit and match the wires to the ones from the car (all nicely color coated). I have a Pioneer Premier and had that plus my subs, amp, and wires installed for $150

 

why spend 80, when you can get it done for 20

 

Why in god's name would you trade the Bose for a pioneer.. let alone actually PAY for it?

 

are you kidding me? I work at best buy and it doesn't cost that much. Either way, there are plug in wiring harnesses that will make your pioneer deck compatible with bose speakers, i'll keep looking for the link and post it when i find it.