how hard is it to put a carbon fiber or alunimum gauge bezel around your gauges? could somebody tell me or post a write up or somethin. thanks.

if you have a pick tool, phillips screw driver, and a 10mm wrench you can do it.
take off the lower dash under the steering columb. (2 screws)
take off the metal plate under steering columb. (2 10mm)
take off both peices of steering columb trim. (6 screws)
take off trim around gauges including cruise, dimmer and security switches (2 screws) this one is tricky so bea carefull
then you can remove the instrument cluster. (3 screws)

after that the clear cover pops off as you release the muliple tabs around it.

There is a really good how-to in the stickies with pictures and all.