p0306 code
so,what is the most common failure with this code, coil or something else?
Is there anyway to check the coil?
If this is the coil failure then wouldnt it misfire constantly? Because it runs fine when not idling.
Thanks
Is there anyway to check the coil?
If this is the coil failure then wouldnt it misfire constantly? Because it runs fine when not idling.
Thanks
OK are you sitting down?
P0306 #6 misfire
Possible causes (I don't know if these are listed in order of likelehood)
Improper spark plug
Insufficient compression
Incorrect fuel pressure
EGR valve
Injector circuit open or shorted
injector
Intake air leak
ignition secondary circuit is open or shorted
Lack of fuel
Magnetized signal plate (flywheel)???
Quite a list isn't it
You can check the coil with a multimeter
I'll give you the specifics later if you want them.
P0306 #6 misfire
Possible causes (I don't know if these are listed in order of likelehood)
Improper spark plug
Insufficient compression
Incorrect fuel pressure
EGR valve
Injector circuit open or shorted
injector
Intake air leak
ignition secondary circuit is open or shorted
Lack of fuel
Magnetized signal plate (flywheel)???
Quite a list isn't it
You can check the coil with a multimeter
I'll give you the specifics later if you want them.
Originally Posted by Russkiy
maxima threw a p0306 trouble code. Is it the coil or what?
the car is acting up on the idle lately. feels like a misfire but only on the idle.
Any response is appreciated.
Thanks
the car is acting up on the idle lately. feels like a misfire but only on the idle.
Any response is appreciated.
Thanks
I think I found the problem
Thanks for the responses, great help.
Found an air leak today at the intake manifold gasket right at cylinder #6. So, i guess that the problem. I'll replace the gasket and possibly the knock sensor since I'll be right there and then we'll go from there.
Thanks for the quick replies, always appreciated!!1
Yegor
Found an air leak today at the intake manifold gasket right at cylinder #6. So, i guess that the problem. I'll replace the gasket and possibly the knock sensor since I'll be right there and then we'll go from there.
Thanks for the quick replies, always appreciated!!1
Yegor
Thread
Thread Starter
Forum
Replies
Last Post
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
Sep 28, 2015 09:01 PM




