4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

BBK clearance, opinions wanted. *PICS*

Thread Tools
 
Search this Thread
 
Old May 6, 2006 | 07:04 AM
  #1  
Akumachan's Avatar
Thread Starter
I never narc'd on nobody.
iTrader: (12)
 
Joined: Sep 2004
Posts: 956
BBK clearance, opinions wanted. *PICS*

Is this too close? I had 5mm spacers on but they pushed the wheels out too far and I had rubbing issues.


I'm able to slide about 2 sheets of paper through the gap, but any more and it won't go...
Old May 6, 2006 | 08:18 AM
  #2  
chillin014's Avatar
Senior Member
iTrader: (67)
 
Joined: Dec 2004
Posts: 8,601
From: houston tx
just curious but what was rubbing with teh spacers? im abotu to get 20 mm spacers and im kinda worried about it hitting the fender constantly
Old May 6, 2006 | 08:51 AM
  #3  
VIP Maxima
Guest
 
Posts: n/a
use the spacers. 2 sheets of paper is way too close.
Old May 6, 2006 | 02:09 PM
  #4  
i30ds's Avatar
Armed and Dangerous
iTrader: (8)
 
Joined: Mar 2004
Posts: 4,412
From: Denver, CO
THats a little too close to comfort. Just even 5 mm spacers will give you enough room.
Old May 6, 2006 | 02:17 PM
  #5  
4DRSpeed's Avatar
Project Ruby......
iTrader: (22)
 
Joined: Mar 2002
Posts: 2,282
From: Maryville, TN
I don't think you can get any closer than Flava 24/7.

http://forums.maxima.org/showthread.php?t=417562

Post #30. He hasn't had any issues, but DAYUM its close.
Old May 6, 2006 | 03:16 PM
  #6  
MaximaSE96's Avatar
Maxima Owner
iTrader: (8)
 
Joined: Jun 2003
Posts: 5,036
a lil close....if u have 5mm spacers get them milles down a mil or 2....i had 20 mm spacers and i had them milled down to 16.5 to fix my fender rubbing issues
Old May 6, 2006 | 04:59 PM
  #7  
Flava_24/7's Avatar
Boosted Panda
iTrader: (46)
 
Joined: Oct 2001
Posts: 8,475
From: Austin TX
Originally Posted by 4DRSpeed
I don't think you can get any closer than Flava 24/7.

http://forums.maxima.org/showthread.php?t=417562

Post #30. He hasn't had any issues, but DAYUM its close.


It was REAL close, and I didnt have any rubbing issues, but just for safety sake I went ahead and put on 5mm spacers.
Old May 6, 2006 | 05:00 PM
  #8  
RickRossTheBoss's Avatar
Newbie - Just Registered
 
Joined: May 2006
Posts: 12
I would recommend some spacers, that is DANG close
Old May 7, 2006 | 12:00 AM
  #9  
Akumachan's Avatar
Thread Starter
I never narc'd on nobody.
iTrader: (12)
 
Joined: Sep 2004
Posts: 956
I have noticed that if I hit the brakes as hard as possible without locking up the wheels morph enough to slightly tap on the calipers, so now theres a slight groove on the inside of my spokes... I may try to get my spacers milled down to 2-2.5mm because 5 pushes it out too far. Thanks for the opinions.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lowpost99
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
9
Oct 26, 2025 06:53 PM
REDinLV
7th Generation Maxima (2009-2015)
5
Aug 15, 2024 12:30 AM
BPuff57
Advanced Suspension, Chassis, and Braking
33
Apr 16, 2020 05:15 AM
BkGreen97
Maximas for Sale / Wanted
2
Apr 2, 2016 05:47 AM
dvcamp
6th Generation Maxima (2004-2008)
7
Sep 18, 2015 10:17 AM




All times are GMT -7. The time now is 11:05 PM.