Help with codes
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Jan 2005
Location: Chicago, IL
Posts: 476
Help with codes
Hey guys,
just scanned it and here are the codes:
P0325 - KNOCK SENSOR (already bought it)
PO130 - O2 sensor (need to buy, can someone tell me which P/N I need?)
P0300 - RANDOM MULTIPLE CYLINDER MISFIRE (what the hell is that)?
P1105 - MAP/ SWITCH BAR SOLENOID ( i think that's vacuum leak)?
Thanks
just scanned it and here are the codes:
P0325 - KNOCK SENSOR (already bought it)
PO130 - O2 sensor (need to buy, can someone tell me which P/N I need?)
P0300 - RANDOM MULTIPLE CYLINDER MISFIRE (what the hell is that)?
P1105 - MAP/ SWITCH BAR SOLENOID ( i think that's vacuum leak)?
Thanks
#2
I think perhaps P0300 is a result of P0325. The random misfire is because the knock sensor is bad?
What does P/N stand for?
You've got me on the P1105! I've never had a vacuum leak but people are always telling me, "You'll know if you have one." Like I'm supposed to know what that means!
What does P/N stand for?
You've got me on the P1105! I've never had a vacuum leak but people are always telling me, "You'll know if you have one." Like I'm supposed to know what that means!
#3
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Jan 2005
Location: Chicago, IL
Posts: 476
I've been checking the stickies a lot (before I posted too, in case people want to ... attack me), and there are a number of problems reported:
My symptoms:
-hard start, continuos cranking (started with flywheel upgrade, may need to change crankshaft sensor?)
-hesitation when driving (occasional)
-def. knock sensor need to change
-black smoke (engine flooded, running rich?)
-O2 (right bank - need to replace)
P/N means part number, basically I am asking for a replacement part number for that right bank O2.
-def. have vacuum leak, it's been a while since I installed the short ram intake and the hoses are porbably bad by now.
that could also account for the MAF/solenoid code.
Will see once I redo the short ram.
My symptoms:
-hard start, continuos cranking (started with flywheel upgrade, may need to change crankshaft sensor?)
-hesitation when driving (occasional)
-def. knock sensor need to change
-black smoke (engine flooded, running rich?)
-O2 (right bank - need to replace)
P/N means part number, basically I am asking for a replacement part number for that right bank O2.
-def. have vacuum leak, it's been a while since I installed the short ram intake and the hoses are porbably bad by now.
that could also account for the MAF/solenoid code.
Will see once I redo the short ram.
#4
Supporting Maxima.org Member
Thread Starter
iTrader: (3)
Join Date: Jan 2005
Location: Chicago, IL
Posts: 476
Does anybody know the equivalent of these p/ns (right bank O2 sensor) on www.oxygensensors.com?
22690-00009 (from courtesy parts.com)
22690-40U06 (NISSAN DEALERSHIP) right bank?
22690-40U16 (NISSAN DEALERSHIP) left bank?
Thanx
22690-00009 (from courtesy parts.com)
22690-40U06 (NISSAN DEALERSHIP) right bank?
22690-40U16 (NISSAN DEALERSHIP) left bank?
Thanx
Thread
Thread Starter
Forum
Replies
Last Post
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
09-28-2015 09:01 PM