Microvision Screen Problem...
#1
Microvision Screen Problem...
I got a screen from someone ,but it doesnt have the wires, the video in wires and such, now i have video equip around and im really handy with splicing wires or such but where does it even plug in on the unit? otherwise i'd have to return the unit and i really dont wanna do that.
#3
You will have three wiring harnesses that need to be plugged in.
There should be the first harness which goes to a video RCA
The second harness should go to the remote control sensor
The third should have three wires, ground, remote turn-on, and constant.
No harnesses = no chance of getting it to work
There should be the first harness which goes to a video RCA
The second harness should go to the remote control sensor
The third should have three wires, ground, remote turn-on, and constant.
No harnesses = no chance of getting it to work
#5
Originally Posted by ManualMaxima
as far i know mine does not have a remote control sensor cause the sensor is on the fornt of the screen surrrounding.......a pic would be very helpful if you hook that up
![Big Grin](https://maxima.org/forums/images/smilies/biggrin.gif)
#6
Originally Posted by Metal Maxima
When you strip the screen down to the board and screen alone, many a thing can be learneded. ![Big Grin](https://maxima.org/forums/images/smilies/biggrin.gif)
![Big Grin](https://maxima.org/forums/images/smilies/biggrin.gif)
#7
Originally Posted by ManualMaxima
well i am sure it has one if stripped down, and has alittle wire that goes a full 2 inches to the sensor. but he never said anything about it not havign that or being stripped down
Ugh, forget it.
![Ugh](https://maxima.org/forums/images/smilies/ugh.gif)
Thread
Thread Starter
Forum
Replies
Last Post
worldwiderecognized
6th Generation Maxima (2004-2008)
0
09-30-2015 01:16 PM