My friend "GTMUGGS" on the org has 350z 18's. they sit very flush, fit perfectly, don't rub and they are staggered so the rear is wider and it looks SICK. I love it.

[QUOTE=QuiksilverMusic]then u got the wrong ones.....if u bought them from a retail place send them back and get the right bolt pattern.....5x114.3

you might've bought the wrong bolt pattern, where did u buy em from?

they are discontinued and extremly hard to find !

17x8.5 in the front and 18x8.5 in the rear. rims are ssr comp-c with a offset of 42. tires in the front are 255/40/17 and the rear are 255/35/18. no rubbing at all. dont have a pic right now.

they still make the EV-S though to my knowledge, right VIP?..

19x8 40mm offset Axis Spyders.

I bought em on ebay used for $400... which is why i bought them. SO CHEAP! Theyre slightly used, but nothing is wrong with them, i checked em all out and they arent bent or anything. The only thing is, im pretty sure theyre 5x112. And unfortunately i obviously cannot send them back, nor do i want to.

well find a german car to put them on cause that's what bolt pattern most of them have

Thought you were done modding?????

thats a good catch. he will never be done modding even if it is small mods

ezaccessory.com they will make adapters to convert from 5x114.3 to 5x112

nope, they dont.they've been discontinued for over 1.5 years now !

i never said i was DONE modding the car, i said i was quitting

good catch, a friend has a set he might just give me ! and i've had these rims for a year now so if i really wanted spacers, id have em by now !

well wtf does miglia make thats comparable to the Evo or EV-S, anything?..

nothing really. their entire lineup is almost gone except the new VR thats the redesigned evo-5 which i think its gone as well. MM is pretty much history !

i have been lookin for a spare ev-s for months now with no luck

the EV-R was a pretty sick rim too.




its the EV-S + grooves on the spokes

Thats Sutter But you can call me stutter if you like. I havent been in years.

I've been trying to find a 19" Mille Evo myself after destroying one on a freakin pot hole. TireRack.com said that they went bankrupt or something..
Guess its time for some new wheels. Hmmm what to get....

man that pisses me off.. MM out of business, wtf. but even if they were still in business what would I do if I messed up a discontinued rim..


hey after reading this among other things I find it hard that they went out of business, like that..

PRODUCTION CAPACITY INCREASED
Due Emme MilliMiglia's factory in Brescia currently manufactures about 600,000 wheels per year in the Mille Miglia brand alone, and the remaining production is for both OEM and customers who have their own brand names (such as Lexus and Toyota). Through the recent purchase of the well-known wheel manufacturer IWC (Italian Wheel Company), overall production is to be increased. IWC's factory is located near to Lake D'lseo, only 20km from our main factory in Brescia. In addition, a new foundry is currently under construction in Spain and this will start production next March with an annual level of 300,000 wheels. The estimated total production from these three factories will be more than 1.5 million wheels.

I also just read that MM just sponsored the Mille Miglia (Thousand Mile ) Race in Italy recently, May '06.. So I doubt they've gone out of business, they've most likely just cut off the export line for the time being or something.

those are big

they look big cuz the car isnt dropped yet.

yes its sad to **** up 1 rim at this time. maybe you can fix it. knock on wood it wont happen to any of us. this is why ive been looking for a spare for months !

its the same thing with my ssr comp-c. rare rims that are no longer made

that **** looks so nice but soo dizzy uhh i cant believe how sweetit look!!!

Yeah, idk man. Ive been searching for MM's of any kind for a good 6-8 months for myself, and theyre hard to find. And if you do find em, there's typically something wrong with them. I did found these on ebay. Theyre the Evo-5's, but theyve got an even smaller bolt setting, 5x110, and two of them are bent... but $150 for all.

http://cgi.ebay.com/ebaymotors/18-Mi...QQcmdZViewItem

Hey Im from Bartlett too, OMFG another Bartlett member!!

Haha, hell yeah...

Oh well Ill cya around Bartlett maybe.

stfu Nick, now about those Catera Miglias.. buy them NOW!! then get an adapter dude.. not a big deal at all.

That rosewood looks good.

Heres a couple of other places i found. Seems like youd have to get a hub kit for all of them, but i mean, if they are discontinued i guess its worth it huh?

http://www.acurazine.com/forums/arch.../t-310987.html

http://www.pfyc.com/store/merchant.m..._Code=GPWHEELS

http://www.wheelworks.co.uk/pricelis...wheels&sub=all

yeah totally. you have any pics of your car?

......Buy Now.

Ill show you mine if you show me yours. Do you have any?

just joking

Look for the maxima.org decals and a semi loud exhaust, oh and i night I sport my hyper yellow fogs.

what a queer.. friggen orange OE bumper lights, no drop, stock rims, CG2. thats nick for ya. but sine I de-modded I'm not much better lmao.

Thank you for confirming that haha

Nice! Ill definately be on the look out. Mine is somewhat loud too.

Dual tips nice!!

Im new to the forum, and I have a 1996 Maxima. Its stock for now, but Im wanting to get some rims. What is the biggest size I can put on it, 16", 17", 18", without having to do any work to make them fit?
Ive tried to use the Search, butit wont let me..and Ive tried to find the answer, but cant.

19" with 35 series

you can even put 20s without any modification, even if dropped, with a stiff set up they go in nicely, but you will rarely, i mean, extremely rarely find a set of 20s that wud look good on a max. i'd say 18s look very nice, 19s and you are a bit pushing it.



btw, i have 350z wheels, im not sure of the offset, but the fitment is right, very nicely aligned with the fender of the car. the wheels dont tuck in, neither stick out.

Hey, once ive got the hub kits for my EV-S's, do you think its worth it to keep the stock rims seeing as though they wont fit anymore?