Need Pictures of Trunk Latch, both on the lid and car body
#1
Need Pictures of Trunk Latch, both on the lid and car body
Could you please post high-res or zoomed in pictures of your trunk latch? Mine is currently broken and i'm trying to figure out how 'off' it is. Perhaps some man-power and simply bending it a few mm will be the trick. I took it to Nissan and they sent me to a body shop... biastads.
Thanks.
Thanks.
#2
Actually you do most of your adjustment through "loop" (for lack of better terms), that's in the trunk near the rear bumper. You have to loosen those two 10mm bolts, and move it up and down, and there's some side to side play. If you need more play, then you'll need to loosen the 4 bolts that hold the trunk up and adjust till the trunk close right.
#3
Gracias amigo! Very very helpful, sounds like a job for the long weekend.
Originally Posted by 1FSTMAX
Actually you do most of your adjustment through "loop" (for lack of better terms), that's in the trunk near the rear bumper. You have to loosen those two 10mm bolts, and move it up and down, and there's some side to side play. If you need more play, then you'll need to loosen the 4 bolts that hold the trunk up and adjust till the trunk close right.
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
06-16-2019 01:35 AM
King_Ten_Ahead
5th Generation Maxima (2000-2003)
14
09-30-2015 04:27 PM
MikesChevelle
5th Generation Maxima (2000-2003)
4
08-06-2015 11:36 AM