vibration..help
#2
I've heard it's an injector problem. My car started doing this recently and I'm trying to remedy the problem as well. I just got a new knock sensor and am waiting to install it but I've heard that could be the source as well.
#6
Try to break it down for us more.
At what speeds does it vibrate/vibrate more
In certain gears?
Only when braking?
only when turning?
Whats your tire pressure?
Have you gotten an alignment recently?
When last were your inner/outer tie rods replaced?
At what speeds does it vibrate/vibrate more
In certain gears?
Only when braking?
only when turning?
Whats your tire pressure?
Have you gotten an alignment recently?
When last were your inner/outer tie rods replaced?
#7
Originally Posted by MDeezy
Try to break it down for us more.
At what speeds does it vibrate/vibrate more
In certain gears?
Only when braking?
only when turning?
Whats your tire pressure?
Have you gotten an alignment recently?
When last were your inner/outer tie rods replaced?
At what speeds does it vibrate/vibrate more
In certain gears?
Only when braking?
only when turning?
Whats your tire pressure?
Have you gotten an alignment recently?
When last were your inner/outer tie rods replaced?
#10
its got brand new kuhmo ecstas and i got my allianment done and the tireds balence twice after i pu them on and it sitll did it. and as i said befor its in any gear fron about 25 -30 and i feel it through the steering wheel. it did it just as bad now as it did befor i lowered it so i know its not that. i was thinkin maybe c/v's.not sure how to check.
#11
the only thinkg i know about checkin c/vs is to listen for poopping when turning and to also just reach under there and feel for slack. no popping out of em....but when i wiggle them theres no slack either. when i turn them there is a little play on the tranny side but not much.
#13
i checkes wheel beringss. i jacked the car up and even tugged on the tire and no play at all. i also cranked the car and eased of the clutch with it in the air. no woble i just dont get what the shake is. i may need rotors but they arent that bad. just alittle shaky under braking
#15
I don't know if you have aftermarket wheels, it could be the wheels don't fit correctly. Might be right bolt pattern, but you could need to add concentric rings under the wheels to fill any gaps between the wheel and the axle. that's the problem I had, and the rings made a huge difference. smooth as Crisco on a slip'n'slide now.