4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

S/C, Turbo or 3.5swap

Thread Tools
 
Search this Thread
 
Old 01-07-2007, 09:38 AM
  #1  
Turbo 3.5
Thread Starter
iTrader: (69)
 
t6378tp's Avatar
 
Join Date: Dec 2005
Location: Philly
Posts: 7,796
S/C, Turbo or 3.5swap

Hey I need more power, I have a healthy 3.0 motor in my 97 and currently running nitrous.

The question is should I go with a 3.5 swap, turbo or s/c the current motor. I drive this car daily and can not have alot of down time installing the parts and for that reason was leaning towards the s/c since the current motor is fine but a 3.5swap would also be nice. I do not know much about turbo setups but it does not look plug and play like the s/c

all opinions welcome
t6378tp is offline  
Old 01-07-2007, 09:42 AM
  #2  
Supporting Maxima.org Member
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Well my opinion if the motor is healthy and your using it as a daily driver, I would recommend S/C. You stay away from alot of the heat from a turbo, and you still have tons of power at your foot with still staying a daily driver.

-matt
matty is offline  
Old 01-07-2007, 10:00 AM
  #3  
Turbo 3.5
Thread Starter
iTrader: (69)
 
t6378tp's Avatar
 
Join Date: Dec 2005
Location: Philly
Posts: 7,796
Originally Posted by matty
Well my opinion if the motor is healthy and your using it as a daily driver, I would recommend S/C. You stay away from alot of the heat from a turbo, and you still have tons of power at your foot with still staying a daily driver.

-matt
yeah was thinking s/c with a good motor and 3.5 if the motor goes bad. turbo makes alot of power but needs to much attention

Matty how much for the s/c kit and what else will I need to complete it
t6378tp is offline  
Old 01-07-2007, 10:05 AM
  #4  
Donating Maxima.org Member
iTrader: (2)
 
MaximaEvolution's Avatar
 
Join Date: Aug 2003
Posts: 726
supercharger is a much better setup for a daily drivin car... especially if most of your drivin is done around the city areas (light to light). There arent as many components therefore theres less to go wrong.

Besides, I'd take the loss of torque as long as I get to keep that sweet whine from the blower
MaximaEvolution is offline  
Old 01-07-2007, 10:10 AM
  #5  
Supporting Maxima.org Member
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
PM sent

-matt
matty is offline  
Old 01-07-2007, 10:14 AM
  #6  
Supporting Maxima.org Member
iTrader: (12)
 
4x4Max's Avatar
 
Join Date: Feb 2004
Posts: 2,579
Whats the 'attention' that a turbo needs that a supercharger wouldnt? I'm just wondering because i dont know much about either. I'm also leaning towards a supercharger myself.
4x4Max is offline  
Old 01-07-2007, 10:34 AM
  #7  
Supporting Maxima.org Member
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Originally Posted by 4x4Max
Whats the 'attention' that a turbo needs that a supercharger wouldnt? I'm just wondering because i dont know much about either. I'm also leaning towards a supercharger myself.
Turbos are alot harder to tune and keep running..there is alot more heat there alot of subjects for melting and burning and what not. Oil feed and drain lines are alot longer and also subject to melting. The S/C are proven just to install, get a good tune and run them.

There are aguments for either side though. Some guys love turbo's some love S/C's....

-matt
matty is offline  
Old 01-07-2007, 10:35 AM
  #8  
Bacon Lover
iTrader: (34)
 
Tatanko's Avatar
 
Join Date: Feb 2003
Location: State College, PA
Posts: 7,672
Given your situation, I vote supercharge it.
Tatanko is offline  
Old 01-07-2007, 10:44 AM
  #9  
Turbo 3.5
Thread Starter
iTrader: (69)
 
t6378tp's Avatar
 
Join Date: Dec 2005
Location: Philly
Posts: 7,796
there seems to be alot more tuning needed with turbos, and alot of little parts here and there to make it work right and it all adds up. In the end it's money turbo's seem to be more money and time

Do not get me wrong I would like to have a turbo setup and if I could do 1 for the same price of a s/c I am on it.
t6378tp is offline  
Old 01-07-2007, 10:59 AM
  #10  
Supporting Maxima.org Member
iTrader: (12)
 
4x4Max's Avatar
 
Join Date: Feb 2004
Posts: 2,579
Originally Posted by matty
Turbos are alot harder to tune and keep running..there is alot more heat there alot of subjects for melting and burning and what not. Oil feed and drain lines are alot longer and also subject to melting. The S/C are proven just to install, get a good tune and run them.

There are aguments for either side though. Some guys love turbo's some love S/C's....

-matt
Ok cool. I've been saving up for *some* major mod, and looks like your kit would be it. I'm about halfway there....hopefully you're still selling them when i'm ready to buy.
4x4Max is offline  
Old 01-07-2007, 11:17 AM
  #11  
Supporting Maxima.org Member
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
I have 4 kits in stock ready to ship.

-matt
matty is offline  
Old 01-07-2007, 11:18 AM
  #12  
Senior Member
iTrader: (5)
 
ethnic6's Avatar
 
Join Date: Jan 2005
Posts: 3,143
honestly i'd rather have a 3.5 swap, a super charger or a turbo have to be maintained frequently, unless u know what ur doin, I wouldn't suggest havin a SC or a turbo, 3.5 is the safest in terms of daily driver
ethnic6 is offline  
Old 01-07-2007, 11:21 AM
  #13  
Supporting Maxima.org Member
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Originally Posted by ethnic6
3.5 is the safest in terms of daily driver
until you burn 2 qts of oil every 1000 miles
matty is offline  
Old 01-07-2007, 12:57 PM
  #14  
Supporting Maxima.org Member
iTrader: (1)
 
HarrisH's Avatar
 
Join Date: Nov 2002
Posts: 1,721
Originally Posted by matty
until you burn 2 qts of oil every 1000 miles
I disagree I've had a 3.5 for over a year and a half and I hardly consume ANY oil at all.
HarrisH is offline  
Old 01-07-2007, 01:00 PM
  #15  
Custom User Title
iTrader: (12)
 
Nismo3112's Avatar
 
Join Date: Jul 2002
Posts: 4,688
Originally Posted by matty
until you burn 2 qts of oil every 1000 miles
I did burn oil but it was more like half a qt. every 3k. Running 13's NA made up for that though.

Low end torque is great for stop and go, and the entire swap can be done for pretty cheap.
Nismo3112 is offline  
Old 01-07-2007, 01:17 PM
  #16  
Supporting Maxima.org Member
 
scrhale's Avatar
 
Join Date: Dec 2004
Location: Atlanta, GA
Posts: 1,183
But no one can beat the sound of the turbo spooling!

Get a 3.5 swap and call it quits. Get a nice leakdown test done on the engine so you don't get one that drinks oil like a college student drinks bud light.
scrhale is offline  
Old 01-07-2007, 01:25 PM
  #17  
dot dot dot ...
iTrader: (22)
 
NmexMAX's Avatar
 
Join Date: Dec 2000
Location: Santa Fe, NM
Posts: 34,588
You mean keystone
NmexMAX is offline  
Old 01-07-2007, 01:35 PM
  #18  
Custom User Title
iTrader: (12)
 
Nismo3112's Avatar
 
Join Date: Jul 2002
Posts: 4,688
Originally Posted by NmexMAX
You mean keystone

because it's true.
Nismo3112 is offline  
Old 01-07-2007, 02:34 PM
  #19  
Team Ramrod
iTrader: (16)
 
lilaclucymaxima's Avatar
 
Join Date: Mar 2004
Posts: 2,821
Why not turbo a 3.5? In all seriousness... if that were me I would lean more toward the 3.5.
lilaclucymaxima is offline  
Old 01-07-2007, 02:52 PM
  #20  
Turbo 3.5
Thread Starter
iTrader: (69)
 
t6378tp's Avatar
 
Join Date: Dec 2005
Location: Philly
Posts: 7,796
Originally Posted by HarrisH
I disagree I've had a 3.5 for over a year and a half and I hardly consume ANY oil at all.
hey who did your swap and how much did it cost, I emailed tilley for a price.

right now I am trying to compare prices, from what I hear 3.5 swap 3000 installed, s/c 2000-2500 not installed, turbo around 2500 no installed.

I do not have the tools for a engine swap so I will have to pay some-1(but who in my area does the swap), a turbo or s/c I will do myself

also if I go with a 3.5 swap I can still use my nitrous and have a newer motor
t6378tp is offline  
Old 01-07-2007, 02:58 PM
  #21  
Turbo 3.5
Thread Starter
iTrader: (69)
 
t6378tp's Avatar
 
Join Date: Dec 2005
Location: Philly
Posts: 7,796
Originally Posted by lilaclucymaxima
Why not turbo a 3.5? In all seriousness... if that were me I would lean more toward the 3.5.
who does 3.5 swap in the phila, south jerz area and how much. I do not have the tools for a engine swap and can not tie up my uncle's garage for a week getting the engine in. this is the only reason I am looking into s/c and turbos cause I can do this at home
t6378tp is offline  
Old 01-07-2007, 04:30 PM
  #22  
Team Ramrod
iTrader: (16)
 
lilaclucymaxima's Avatar
 
Join Date: Mar 2004
Posts: 2,821
Originally Posted by t6378tp
who does 3.5 swap in the phila, south jerz area and how much. I do not have the tools for a engine swap and can not tie up my uncle's garage for a week getting the engine in. this is the only reason I am looking into s/c and turbos cause I can do this at home
I have no clue, if you lived closer to me I could give you the names of a few people... try checking the regional forums. You should be able to find somebody there. Good luck with whatever you do.
lilaclucymaxima is offline  
Old 01-07-2007, 05:10 PM
  #23  
VQ35 FTW
iTrader: (2)
 
mastercater7's Avatar
 
Join Date: Sep 2006
Location: Seattle, WA
Posts: 823
you can always change the timing on the 3.5 and put the s/c on that
vote for supercharger
mastercater7 is offline  
Old 01-07-2007, 05:18 PM
  #24  
Turbo 3.5
Thread Starter
iTrader: (69)
 
t6378tp's Avatar
 
Join Date: Dec 2005
Location: Philly
Posts: 7,796
I will only do 1 of the 3 if I add anyithng else I will spray the 3.5 with a 75 shot
t6378tp is offline  
Old 01-07-2007, 05:54 PM
  #25  
Supporting Maxima.org Member
iTrader: (6)
 
motocross416's Avatar
 
Join Date: Jan 2004
Location: Traverse City, MI
Posts: 785
Since you're in PA, you're fairly close to Tilley if you can't do a 3.5 swap yourself
motocross416 is offline  
Old 01-07-2007, 06:00 PM
  #26  
Maxima Owner
iTrader: (8)
 
MaximaSE96's Avatar
 
Join Date: Jun 2003
Posts: 5,062
if u have all the parts u need IMO a SC would require the less down time....if u ship ur car off to Tilley for the swap its prolly going to be down for a week or two...also IMO there is more to go wrong with swap....jsut because of all the part mixing and matchin
MaximaSE96 is offline  
Old 01-07-2007, 06:26 PM
  #27  
Supporting Maxima.org Member
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Originally Posted by MaximaSE96
if u have all the parts u need IMO a SC would require the less down time....if u ship ur car off to Tilley for the swap its prolly going to be down for a week or two...also IMO there is more to go wrong with swap....jsut because of all the part mixing and matchin
Way too many variables that have to all come together. If they dont then your out the entire swap with either a blown motor, a motor that drinks oil, or deciding if your going to swap back to 3.0 or risk getting another 3.5.

-matt
matty is offline  
Old 01-07-2007, 06:28 PM
  #28  
Senior Member
iTrader: (11)
 
MOHFpro90's Avatar
 
Join Date: Aug 2006
Location: Sunshine State
Posts: 4,717
I vote 3.5. You wont regret it. Get a few guys to help you out, one with a shop/access to one would be great. You're looking at a weekends work(not totally sure, never done it) with a few forum/max guys. Also, The 3.5 is a great platform for later modding, IE, the Turbo. Also, you got the nitrous on the 3.5. I would go that rout.
MOHFpro90 is offline  
Old 01-07-2007, 06:55 PM
  #29  
Senior Member
iTrader: (5)
 
ethnic6's Avatar
 
Join Date: Jan 2005
Posts: 3,143
Originally Posted by lilaclucymaxima
Why not turbo a 3.5? In all seriousness... if that were me I would lean more toward the 3.5.


dooooooo iiiiiiit
ethnic6 is offline  
Old 01-07-2007, 07:02 PM
  #30  
Ichiban King
iTrader: (5)
 
Apparition's Avatar
 
Join Date: Jan 2006
Location: PNW
Posts: 2,875
I vote for Matty's setup, which is the setup I was gonna do before I even knew of Matty.. S/C'ed DE-K swap. VERY reliable!
Apparition is offline  
Old 01-07-2007, 07:45 PM
  #31  
Senior Member
 
Dexter's Avatar
 
Join Date: Apr 2005
Posts: 821
00vi + S/C! that's what i'm going for.

hey matty can you PM me info on your S/C kits, i might make it a summer project.
Dexter is offline  
Old 01-07-2007, 08:15 PM
  #32  
There's never a day when something's not on sale
iTrader: (23)
 
blackmaxx96's Avatar
 
Join Date: Feb 2004
Posts: 3,389
Or do what NCSU_MAX is doing this spring...
MEVI, EU, SC.
We're gonna do it as a weekend project....
blackmaxx96 is offline  
Old 01-07-2007, 08:26 PM
  #33  
oh noes!!!!1111
iTrader: (11)
 
abci30's Avatar
 
Join Date: Oct 2003
Posts: 546
i can honestly say that JeEve's turbo setup is just as if not more realiable than my s/c. He seems to have more problems with trannys than i do though. If i could do it all over again i would rather have the turbo, you can have power and torque. BTW a 2500 turbo kit must no consist of much, really good deal, or used parts because when i was pricing things out pipes along would cost about 1300 for ss + a decent size turbo for 700 and your are already at 2000 and a lot more parts to go.
abci30 is offline  
Old 01-07-2007, 08:34 PM
  #34  
Supporting Maxima.org Member
iTrader: (8)
 
nismology's Avatar
 
Join Date: Apr 2003
Location: Miami, FL
Posts: 9,116
Originally Posted by matty
until you burn 2 qts of oil every 1000 miles
Yea since every VQ35 does that. Gimme a break...
nismology is offline  
Old 01-08-2007, 04:01 AM
  #35  
Supporting Maxima.org Member
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Originally Posted by nismology
Yea since every VQ35 does that. Gimme a break...
I never said "every VQ35 does that", did I ??

I just dont like gambleing when it comes to my car especially for a few thousand dollars.

-matt
matty is offline  
Old 01-08-2007, 04:04 AM
  #36  
Supporting Maxima.org Member
iTrader: (6)
 
natty99's Avatar
 
Join Date: Jul 2005
Location: Washington, DC
Posts: 558
go for the VQ35......IMO, nothing is sweeter than all-motor power.
natty99 is offline  
Old 01-08-2007, 08:25 AM
  #37  
Black Lion
iTrader: (12)
 
maxprivate's Avatar
 
Join Date: Sep 2005
Location: NJ, Down by the River
Posts: 2,684
hey matty can you pm me pricing info on the SC. also is stillen still making one? i heard there where lots of problems with the idle pulleyon the v2 sc . I assume you have resolved this problem.
maxprivate is offline  
Old 01-08-2007, 09:29 AM
  #38  
Ichiban King
iTrader: (5)
 
Apparition's Avatar
 
Join Date: Jan 2006
Location: PNW
Posts: 2,875
3.5 FTGay.. If it didn't come in your car from the factory, then I'm not gambling with the 3.5. I would trust only someone like Tilley with that engine. Too many stories of burning oil and destroying head gaskets.

We do have a lot of guys who have no probs, like Nismology and GoalieKeg.. But quite a few of the guys DO have catchcans that fill up rather quickly.
Apparition is offline  
Old 01-08-2007, 09:41 AM
  #39  
Supporting Maxima.org Member
iTrader: (54)
 
matty's Avatar
 
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
Originally Posted by Apparition
We do have a lot of guys who have no probs, like Nismology and GoalieKeg.. But quite a few of the guys DO have catchcans that fill up rather quickly.
Altimta guys and 350Z guys, some have the same issues, NOT all of them. 3.5 is a risk
matty is offline  
Old 01-08-2007, 09:57 AM
  #40  
Supporting Maxima.org Member
iTrader: (8)
 
nismology's Avatar
 
Join Date: Apr 2003
Location: Miami, FL
Posts: 9,116
Originally Posted by Apparition
We do have a lot of guys who have no probs, like Nismology and GoalieKeg.. But quite a few of the guys DO have catchcans that fill up rather quickly.
Mine isn't in yet...



But i can guarantee you it won't burn oil.
nismology is offline  


Quick Reply: S/C, Turbo or 3.5swap



All times are GMT -7. The time now is 03:39 PM.