hey guys what dynomax turbo muffler do i need for my 95 max? they have two that are 2 1/2 inches that ive seen. any help thanks

 

dont get it it sounds like garbage... especially if u have a y pipe

 

i heard one in person. sounded pretty good acually. what would recamend

 

do u have a y pipe?

 

the best set up for our exhaust would be Cattman, no other brand can beat it

 

If you're doing it to get power it won't really net you much power especially if you're NA.

Get the largest chambered one you can. How it sounds is a subjective thing. If you heard one and like it, then get it. I have a very large 3" chambered SuperTurbo (#17769) to reduce noise. I'm also using a 3" Car Chemistry insert at the tailpipe too. I probably lost maybe 5hp coming from a 70mm GReddy straight through but I don't care. I've got enough ponies anyways for my own use. Check out the #17748 muffler. Catalog is online.

 

Agreed... #17748 is the one you need. I'm getting the 2 1/4" inlet one...#17747.

 

i have a 2 1/2 b pipe from budget so shouldnt i get a muffler with the same size pipe? im confused. and no im not getting it for power. u dont get hp from a muffler. i just need one for a little sound.

 

#17748 or #17733 will work too, i had to get one to quiet down my last maxima and it worked perfectly.

 

The Borla Tubo doesn't sound bad in my opinion. It's a little louder than the #17748, but it's stainless steel and in your climate, it will last. $100 if you look online.

 

17793 works great for me. Its 3" and rated for 239 crank HP. Its not too loud even with a 2.5" unresonated b-pipe and a y-pipe.

 

No sorry it doesnt. Only time it soudns bad is with a test pipe. And i do have a y pipe.

 

thanks for the input fellas helps alot. picking this has been the hardest thing i had to do on my car

 

dynomax sounds good might need to change your resonator though to get the best sound out of it

 

Some people don't seem to realize that there are several different models of the superturbo. Obviously, if you get the 14" one & you have a y-pipe + b-pipe it will be loud. Getting the 17748 or 17747 which are both 20" will be good enough (as will other #'s that are large enough).

IMHO saying Dynomax sounds like garbage is like saying Nissan is slow

 

uhh... nissan is slow.. and yea dynomax does sound like garbage... i wouldnt be saying that if i didnt experience it myself....

 

Still haven't quantified your statement. I may be incorrect, we'll see when I have mine installed, but you have made a blanket statement with no proof to back it up.

 

to the OP.......look if u like fart can sound exhaust that drowns then go with dynomax

 

everything really sounds like a fart can unless its stock or a v8. thanks for your input though.

 

Oh really? Is this what fart can exhaust sounds like now?

 

yea its with a stock y pipe..........

 

All TRUE. POS!

 

I was thinking of putting one on my 97 manual with a ce y pipe, i have a stock b pipe but might upgrade to a budget b, what size inlet am i going to need and am i going to be able to install this myself i should i leave it to a shop

 

The Budget B pipe is 2.5" O.D. pipe with a two bolt exhaust flange welded at the end. Unless the muffler is similar to the stock unit with an extension and two bolt exhaust flange, you will need to have a short piece of pipe with a slight bend in it with a two bolt exhaust flange welded on the end to mate up to B pipe. Most of the aftermarket universal mufflers do not have flanges. A qualified muffler/exhaust shop should be able to do it for you.

 

Any update? Did you go with it or not?