brandnew

iTrader: (5)

If any1 in the ct area has done I'm thinkin about purchasing 1 and wanted to know if any of yall can put it in?

NmexMAX

iTrader: (22)

You'll have better luck in here

Cdg2125

iTrader: (7)

yes I have. I may be the only one in CT now but I'm not sure. You really shouldn't be doing these mods if you're not doing any work yourself. Doing swaps requires you to know what you did and how to fix problems that occur. If you have someone else do the swap, you'll most likely need to have them fix problems if you don't know what was done. Just my $.02 about it.

LiGhtSoUt

iTrader: (6)

exactly wat cdg said its good to have someone there help u with the swap this way u can see wats going on but with something like the oovi you may have a leak or something small and then you would have to go there to get it fixed

brandnew

iTrader: (5)

well my family is my mechanic so i don't think i would have a major problems wit going back just wanted a second opinion or some pointers

XJinCT

iTrader: (3)

from what ive read it doesnt seem to difficult if you have minor knowledge in turning wrenches. i say go for it.

or just go all out like me and 3.5 that *****.

95turbo gxe

iTrader: (25)

Never heard of such a swap!

NmexMAX

iTrader: (22)

There are tons of threads with tons of information. But I'm assuming you haven't seen any of them. IMO, you could have any family mechanic work on it, but a Maxima owner is just that much better and more efficient. I don't care how many other cars they've built/fixed/how many years they've been doing it, fact is, Maxima specific people are just more efficient. Plain and simple.

With all that said, Cdg2125 knows his A32's, and 00VI's. I would get a hold of him if I were you. Or, get it doen by your family mechanics. Not a decision we can make for you.

maxima985spd

I think you should try to do it.

/thread

brandnew

iTrader: (5)

Hey if cdg is willing to do it I would link up wit him to do it........

LiGhtSoUt

iTrader: (6)

if your keeping the lower intake manifold your gonna have to customize ur stock 4th gen rear valve cover to work just as a heads up

Cdg2125

iTrader: (7)

well it depends what route he goes. If you're thinking about doing the swap then start reading the threads about the swap. There is a lot to read. It's not a hard swap if you know what you're doing but if you don't you'll face a lot of problems and your car will not run for a while. XJinCT, did you 3.5 swap?