Now that I followed everyones' unaminous opinions, I turned back the champion plugs for NGK copper plug, I have this dilemma.

On the last spark plug, in the rear, in the middle, (oh you guys know that one), the coil came out but not a piece of rubber that is still in the chamber.

Uh huh, that is preventing me from taking the plug out.

How can I get that rubber piece around the top of plug?

Hmmm.

 

Get some long tweasers or needle noise pliers.

 

its not that bad just improvise it out. your lucky one of my rear sp's porcelin broke into pieces inside and jammed in there so the socket wouldnt go in.
talk about pissed

 

This is actually in the maintenance sticky at the top of this forum.

http://forums.maxima.org/showpost.ph...5&postcount=14

 

sick i also had this problem and only changed 5 of my 6 plugs cuz of it and was gunna go buy some long pliers till i read that post

now i can fix this problem tomorrow free of charge

 

The crazy glue solution, why didn't I think of that. Today I will do that.

 

the crazy glue method works!

 

I made up a tool from coat hanger wire. I made a small loop at one end with needle nosed pliers. I just inserted the looped end in the rubber piece and was able to lift it out. I now have a tool for next time in case it happens again.

 

Just used the crazy glue and it worked!