How do I remove the fenders?
09-26-2001 | 02:41 PM
#2
Donating Maxima.org Member
Joined: Aug 2000
Posts: 1,121
If they are like the Altima, remove the screws for the plastic shield in the wheel well. Then open up the hood and remove the screws just inside the engine bay. Open up your door and remove the screws at the bottom that hold the fender on that side. Then look behind the bumper where the fender connects to it and loosen the screws there.
Pull the fender off carefully from the bottom and unhook it from the top. It's pretty simple, it's a good thing they aren't welded on.
Pull the fender off carefully from the bottom and unhook it from the top. It's pretty simple, it's a good thing they aren't welded on.
09-26-2001 | 02:50 PM
#3
Originally posted by Ants97SE
If they are like the Altima, remove the screws for the plastic shield in the wheel well. Then open up the hood and remove the screws just inside the engine bay. Open up your door and remove the screws at the bottom that hold the fender on that side. Then look behind the bumper where the fender connects to it and loosen the screws there.
Pull the fender off carefully from the bottom and unhook it from the top. It's pretty simple, it's a good thing they aren't welded on.
If they are like the Altima, remove the screws for the plastic shield in the wheel well. Then open up the hood and remove the screws just inside the engine bay. Open up your door and remove the screws at the bottom that hold the fender on that side. Then look behind the bumper where the fender connects to it and loosen the screws there.
Pull the fender off carefully from the bottom and unhook it from the top. It's pretty simple, it's a good thing they aren't welded on.
Thread
Thread Starter
Forum
Replies
Last Post
my03maxima
7th Generation Maxima (2009-2015)
9
07-28-2024 08:40 AM
RealityCheck
4th Generation Maxima (1995-1999)
7
10-02-2015 07:34 PM