Y-pipe question
09-21-2007 | 04:02 AM
#1
Thread Starter
Joined: Mar 2007
Posts: 391
From: Torbay, NL, Canada
Y-pipe question
I have a 98 and I am looking to replace the Y-Pipe. I can get a deal on a used Y-pipe from a 2000 but it has an extra bracket on it. Both y-pipes are Fed spec and the 2000 is aftermarket. Is that the only difference? Should the 2000 bolt up without any clearance problems once the bracket is removed.
09-21-2007 | 05:09 AM
#2
According to the www.cattman.com web site, 99-01 are the same.
95-98 are the same.
based on that information, it will not work.
Check his website as the pipes are slightly different in design.
95-98 are the same.
based on that information, it will not work.
Check his website as the pipes are slightly different in design.
Last edited by JSMax; 09-21-2007 at 05:12 AM.
09-21-2007 | 07:29 AM
#3
According to the www.cattman.com web site, 99-01 are the same.
95-98 are the same.
based on that information, it will not work.
Check his website as the pipes are slightly different in design.
95-98 are the same.
based on that information, it will not work.
Check his website as the pipes are slightly different in design.
09-21-2007 | 10:34 AM
#4
Thread Starter
Joined: Mar 2007
Posts: 391
From: Torbay, NL, Canada
Thanks JSMax. I know the 2000 and 2001 has a bracket on the pipe. I want to know if that is the only difference. I belive it will work but I am not sure, I have the the same thoughts as 99BlackMaxMS.
Thread
Thread Starter
Forum
Replies
Last Post
trsandrew
7th Generation Maxima (2009-2015)
17
04-08-2016 07:45 PM
Unclejunebug
5th Generation Maxima (2000-2003)
10
04-02-2016 06:42 AM