Fidanza flywheel
#1
Fidanza flywheel
Has anyone that has the Fidanze flywheel replaced the insert? I found that you can get inserts rather than resurface the flywheel (which has already been done once). Anyone have more info?
S
S
#5
yah there pretty cool, Better then paying for someone to resurface your stock flywheel and worrying about them screwing it up...
The friction plates are like $80
http://www.nolimitmotorsport.com/prod/fz-229501
The friction plates are like $80
http://www.nolimitmotorsport.com/prod/fz-229501
Last edited by S1cTech; 05-19-2008 at 07:39 AM.
#8
#13
I'll be doing the install this weekend. I'll try to report back my experience. From what I gather from others, it doesn't appear to be much of a problem. I did a search last night, and the only problems people have is if they happen to have an older flywheel, and the screw holes didn't line up. However it also seems that Fidanza is very customer driven and will make every effort to resolve the issue.
S
S
#14
Supporting Maxima.org Member
iTrader: (54)
Join Date: Feb 2001
Location: Northern Jersey
Posts: 10,166
They are great. Perfect example....
Bought my Flywheel from Fidanza when they first started making flywheels for the Maxima. Maybe 2002. This past year I was doing all my upgrades for my car and ordered the frictions plate for the flywheel along with a new clutch. All down to the day of the install and the friction surface holes DONT LINE UP. So I called Fidanza and faxed them a drawing of the hole pattern on my flywheel. They called me right back and said this was an early production flywheel and they no longer make the friction surface for it...Great, now what. Well he overnighted a BRAND NEW Flywheel out to me with a call sheet from UPS to ship the old one back. What great guys !!
-matt
Bought my Flywheel from Fidanza when they first started making flywheels for the Maxima. Maybe 2002. This past year I was doing all my upgrades for my car and ordered the frictions plate for the flywheel along with a new clutch. All down to the day of the install and the friction surface holes DONT LINE UP. So I called Fidanza and faxed them a drawing of the hole pattern on my flywheel. They called me right back and said this was an early production flywheel and they no longer make the friction surface for it...Great, now what. Well he overnighted a BRAND NEW Flywheel out to me with a call sheet from UPS to ship the old one back. What great guys !!
-matt
#15
They are great. Perfect example....
Bought my Flywheel from Fidanza when they first started making flywheels for the Maxima. Maybe 2002. This past year I was doing all my upgrades for my car and ordered the frictions plate for the flywheel along with a new clutch. All down to the day of the install and the friction surface holes DONT LINE UP. So I called Fidanza and faxed them a drawing of the hole pattern on my flywheel. They called me right back and said this was an early production flywheel and they no longer make the friction surface for it...Great, now what. Well he overnighted a BRAND NEW Flywheel out to me with a call sheet from UPS to ship the old one back. What great guys !!
-matt
Bought my Flywheel from Fidanza when they first started making flywheels for the Maxima. Maybe 2002. This past year I was doing all my upgrades for my car and ordered the frictions plate for the flywheel along with a new clutch. All down to the day of the install and the friction surface holes DONT LINE UP. So I called Fidanza and faxed them a drawing of the hole pattern on my flywheel. They called me right back and said this was an early production flywheel and they no longer make the friction surface for it...Great, now what. Well he overnighted a BRAND NEW Flywheel out to me with a call sheet from UPS to ship the old one back. What great guys !!
-matt
Thread
Thread Starter
Forum
Replies
Last Post
KabirUTA13
5th Generation Classifieds (2000-2003)
19
10-17-2015 02:15 AM
kenc15
4th Generation Classifieds (1995-1999)
8
09-25-2015 06:38 AM