Whole car starts vibrating at 60+ MPH, plus shake steering wheel.
Whole car starts vibrating at 60+ MPH, plus shake steering wheel.
i got a problem i got a shake *** steering wheel if i turn it an inch or 2 while driving my wheels dont even move. my left ball joint needs replacing. i got a STOCk suspension with 142k Miles on it. my wheels are aligned. and balanced. what can be the cause of this problems? the ball joint cant be responsible for the shaky steering wheel. thou.
Member who somehow became The President of The SE-L Club
iTrader: (19)
Joined: Jun 2001
Posts: 16,024
i got a problem i got a shake *** steering wheel if i turn it an inch or 2 while driving my wheels dont even move. my left ball joint needs replacing. i got a STOCk suspension with 142k Miles on it. my wheels are aligned. and balanced. what can be the cause of this problems? the ball joint cant be responsible for the shaky steering wheel. thou.


anyway, you pretty much answered your own question. get the ball joint replaced.
Loose or broken components in your steering and suspension are not something you should put off fixing/replacing. failure at the wrong time could be very bad news.
theres about 30 diffrent things that can cause a car to shake..
But first thing you need to change is that ball joint, and you might as well do the other side to.
When i had the issue on my 99 I replaced just about everypart of the suspension and then the axles... Turned out the sh!ty motostorm pulley loosend up at the alen screws the hold the 2 pieces together and it caused a vibration through the hole car , but i only seemed to notice it at mid range rpms...
Back to the point, check and change the easy and obvious stuff first...
Also what kind of tires do you have and what shape are they in, 90% of the time its something that simple..
But first thing you need to change is that ball joint, and you might as well do the other side to.
When i had the issue on my 99 I replaced just about everypart of the suspension and then the axles... Turned out the sh!ty motostorm pulley loosend up at the alen screws the hold the 2 pieces together and it caused a vibration through the hole car , but i only seemed to notice it at mid range rpms...
Back to the point, check and change the easy and obvious stuff first...
Also what kind of tires do you have and what shape are they in, 90% of the time its something that simple..
When I bought my 96 it had three different brand of tires on it and two different widths! (Fronts were 195, backs 215). It had a wicked shimmy over 60 as well. I bought four new tires and had them balanced and now its glass smooth and tracks like an Audi.
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
Jun 16, 2019 01:35 AM
trasmadean
6th Generation Maxima (2004-2008)
13
Feb 1, 2017 08:20 PM




