what projector is this?!?
#1
what projector is this?!?
please... anyone know what vehicle this projector came from? and can you prove it?
^^ this is almost identical to my projector, but the bi-xenon solenoid on mine only has 2 wires coming out of the plug.
i have been told A3, A6, E46, VW Passat, etc.
it would make sense to be all of them, because many vehicles share projectors, but these 4 cars do not.
i thought they were A6 until i was looking for a schematic, and no A6 came with this particular projector, or at least as far as i could tell. obviously, it's bi-xenon, but that doesn't help much.
any help is greatly appreciated! THANKS!
tyler
(pic is courtesy of eBay)
^^ this is almost identical to my projector, but the bi-xenon solenoid on mine only has 2 wires coming out of the plug.
i have been told A3, A6, E46, VW Passat, etc.
it would make sense to be all of them, because many vehicles share projectors, but these 4 cars do not.
i thought they were A6 until i was looking for a schematic, and no A6 came with this particular projector, or at least as far as i could tell. obviously, it's bi-xenon, but that doesn't help much.
any help is greatly appreciated! THANKS!
tyler
(pic is courtesy of eBay)
Last edited by tyler5619; 07-18-2009 at 10:30 PM.
#7
That is a Bosch e46 sir. if you need proof go to www.hidplanet.com/forums and search e46.
#9
so one of my "e46" projectors ended up broken, the day after my retrofit was completed, the female connector on my solenoid broke off somehow.
there's a guy selling a single e46 on hidplanet, and everything looks the same except for the bulb holder and the bixenon solenoid. his is missing the pigtail, so i would have to use mine.
2 questions:
1) my bulb holder is the type that inserts, swivels 1/4 turn clockwise, and is screwed in with 3 x T10 star screws. his bulb holder was a plastic screw-type, but it's missing. will my bulb holder swap in?
2) my bixenon solenoid pigtail has 2 wires, his was 3, but it too is missing. will my pigtail plug into his female connector?
worst case scenario, i spend 35 bucks on something i can't use, but it would be nice to make a good decision on this f#$%ing retrofit for once.
there's a guy selling a single e46 on hidplanet, and everything looks the same except for the bulb holder and the bixenon solenoid. his is missing the pigtail, so i would have to use mine.
2 questions:
1) my bulb holder is the type that inserts, swivels 1/4 turn clockwise, and is screwed in with 3 x T10 star screws. his bulb holder was a plastic screw-type, but it's missing. will my bulb holder swap in?
2) my bixenon solenoid pigtail has 2 wires, his was 3, but it too is missing. will my pigtail plug into his female connector?
worst case scenario, i spend 35 bucks on something i can't use, but it would be nice to make a good decision on this f#$%ing retrofit for once.
Thread
Thread Starter
Forum
Replies
Last Post
umnitza
Group Deals / Sponsors Forum
0
09-01-2015 01:03 PM