4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

95 Maxima slipping automatic tranny help.

Thread Tools
 
Search this Thread
 
Old 12-24-2009 | 07:18 AM
  #41  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
Originally Posted by TravisCadello
how do i know if my tranny is both tires locking? or one tire locking or what ever its called? or it dont matter?
if you have a US maxima that was never modified you do not have VLSD. No 4th gen in the US was sold with VLSD. The I30t was, as was the canadian SE at one point.
Old 12-28-2009 | 03:13 PM
  #42  
TravisCadello's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2009
Posts: 1,432
I started the car today first time in past week. well we were driving it from my back yard to the front and when its in D it dont go NOWHERE only rev up and when i put it into 1st gear it moves around 3000RPMS

well when i got to my front yard after probably 3 minutes of spining at 3000RPM the transmission dip stock was blowing out white smoke so i took out the dip stick and a lot of smoke came out didn't smell nasty just lil funny not like gears either. what would cause it to smoke?


it has ATF with Lucas stop slip and a little Brake Fluid.
Old 12-28-2009 | 03:26 PM
  #43  
KRRZ350's Avatar
Supporting Maxima.org Member
iTrader: (29)
 
Joined: Oct 2005
Posts: 4,572
From: Middleboro/Carver, Ma
Originally Posted by internetautomar
find another 95-99 maxima with A/T or a 96-99 I30 with A/T
you can also use the trans from a 96-99 I30t, but it has VLSD and uses different axles.
VERY common for 96-98 non touring I30's to have the $500 "Traction enhancement package" added to the car........... aka VLSD. It also came standard on ALL '99 I30's.

I have to go over this alot,I wish the damn I30 stickies would get edited for this and the perforated seats.


Your tranny tech is a hack, idiot, or scammer if he didn't take a line pressure measurement before commenting on "this or that", Either that or you weren't being generous ($) enough. Either way I bet it's low, I would suspect the pump or pressure valves, either way @ 1/4 million miles you would want to just get a yard tranny for $100.
Old 12-28-2009 | 03:29 PM
  #44  
KRRZ350's Avatar
Supporting Maxima.org Member
iTrader: (29)
 
Joined: Oct 2005
Posts: 4,572
From: Middleboro/Carver, Ma
Originally Posted by TravisCadello
what would cause it to smoke?
Who cares, it has 260K and it's fubar'd, put another one in it, and a new radiator AT THE SAME TIME. Or bypass the stock cooler & add your own.
Old 12-28-2009 | 11:49 PM
  #45  
TravisCadello's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2009
Posts: 1,432
Originally Posted by KRRZ350
Who cares, it has 260K and it's fubar'd, put another one in it, and a new radiator AT THE SAME TIME. Or bypass the stock cooler & add your own.

My Radiator is 6 months old! And i might add a after market tranny cooler. does anyone have a link to a good cheap tranny cooler that will work good?
Old 12-29-2009 | 08:38 AM
  #46  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
don't bypass the factory cooler, just add the extra one inline to the hoses, a little more work but not too bad.
Old 12-29-2009 | 01:53 PM
  #47  
TravisCadello's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2009
Posts: 1,432
Originally Posted by internetautomar
don't bypass the factory cooler, just add the extra one inline to the hoses, a little more work but not too bad.

Will do, I found one for $38.99.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
06-16-2019 02:35 AM
SmokinMax02
5th Generation Maxima (2000-2003)
18
09-11-2015 01:25 AM
Supragte
5th Generation Maxima (2000-2003)
1
08-12-2015 11:00 PM
follyburr
6th Generation Maxima (2004-2008)
0
08-12-2015 09:57 PM
cmpowell86
6th Generation Maxima (2004-2008)
1
08-10-2015 01:35 AM




All times are GMT -7. The time now is 01:42 PM.