hernameismina

iTrader: (5)

I have a complete 00vi kit including the 00 fuel rail and injectors. Now i have read and read and read and i wanted to know if there was a way to do this mod with the 4th gen fuel rail and injectors or possibly just the injectors...

As you can see im trying to avoid getting a vafc2 to tune the larger injectors... in hopes that i would only have to do the rpm switch for the power rod(trying to keep this mod as low budget as possible)....

i appreciate all input and suggestions...
thanks guys

ajm8127

iTrader: (8)

Search the All Motor section of the forum. There is even a PDF guide someone threw together.

hornepirate

iTrader: (23)

before this thread locks so all the newbies can read it.

if you dont want to have to tune use the 4th gen lower and the 4th gen fuel rail/ injectors...fill the bolt holes in the lower manifold and tap new holes in the lower manifold.

FallenOne

iTrader: (17)

But so this thread doesnt go to waste, Ive got a Complete 00Vi for sale! PM me if interested

ajcool2

iTrader: (43)

You read read and read but you still didnt read enough. smh

hernameismina

iTrader: (5)

i know all about using the 4th gen lower and all that i just wanted to know if there was a way to use just the 4th gen injectors... i guess not...hey aj this is the kit i bought from you ... do u have a vafcII layin around by any chance

ajcool2

iTrader: (43)

Nope I dont. Ebay is probably your best bet. You could always sell the lower and injectors and mod the 4th gen lower.