Trans Codes
Trans Codes
I believe my 99 GLE transmission is acting up is there anyway we can retrieve codes like the CEL method. Or do they throw codes? I'm a noob here so be nice
Symptom is in the morning she runs great other than a hard shift but after she warm or been running all day the trans start to knock or like something loose. Idk how to explain this but it's not normal. it happens around 3 in 4 and when i hit it hard. normal cruising it not as notice but hard driving it's like something going to snap.
Symptom is in the morning she runs great other than a hard shift but after she warm or been running all day the trans start to knock or like something loose. Idk how to explain this but it's not normal. it happens around 3 in 4 and when i hit it hard. normal cruising it not as notice but hard driving it's like something going to snap.
yes, u shd be able to retrieve transmission codes from the o/d light i think. I have MT so i am not certain. Do A SEARCH. or check the stickies. the method for retrieving trans codes is somewhere. PM sent
P.s I just found how to get the codes... thanks for the FSM you sent me... I told them you guys rock hard.
Last edited by najee1062; Aug 3, 2010 at 11:14 PM.
I did the manual trans code by the O/D indicator and had no codes come up... But I still have not found what that knocking or thumping sound is coming from. Starting from the light or stop sign she takes off normal but when she shift from third to fourth it's a thumping or knocking sound like something is bumping against something and even when it down shift to a lower gear when hitting the throttle it bumps again and bumps again when hitting the next gear. In other word this is happening around 3rd and 4th gear. I posted another thread concerning a support bearing on the right axle support bracket. could this have something to do with this issue also..... here a link http://forums.maxima.org/4th-generat...ng-change.html
I'm new here I have a 97 maxima my transmission is acting up I was driving on whitestone brige
I went through the ez pass at 20 mph I hit the gas and the car red lined and. Never hit 2nd gear
Now the car is in d but it gust redlines so I put it in 2gear and it goes at 40 mph I put it in drive and it catches third gear and shifts to 4 gear it self but when I come to a stop doesint grab any gear has anybody had this problem before
I went through the ez pass at 20 mph I hit the gas and the car red lined and. Never hit 2nd gear
Now the car is in d but it gust redlines so I put it in 2gear and it goes at 40 mph I put it in drive and it catches third gear and shifts to 4 gear it self but when I come to a stop doesint grab any gear has anybody had this problem before
Thread
Thread Starter
Forum
Replies
Last Post
hayne
6th Generation Maxima (2004-2008)
2
Oct 5, 2015 11:53 AM
ef9
4th Generation Maxima (1995-1999)
10
Oct 4, 2015 08:43 AM



i think you'll need a special scanner to scan for the trans codes.
