I was running (i think) a 69.5" belt with my 3.33" pully, but I believe it was too small. Does anyone know the stock belt length? I dont think I kept my old one i cant find it

 

Sorry I donno the question to this, but I have a question for you. You are automagic right ?

When you accelerate, can you hear the whine of the supercharger ? Have you ever heard a Ford Lightning ? I was wondering if the Maxima's supercharger has a similer whine to that of a SVT F-150. If so, I ENVY you.

 

dont have an auto. the v2 whines at 1500 to 2000 rpm. the v1's whine a LOT more than v2.

 

funny you asked this question today. I was just talking to MardiGrasMax about the size of the stock belts yesterday. He's running a 690mm belt with a 3.25". Maybe that can help you figure it out. I got the stock belt part #'s from Stillen about 8 months ago, but now I can't find where I wrote it down. Try and give them a call.

 

Don't know what the length is but I have the part#

Gates Micro-V K060710

 

Stock without supercharger is 430K6, 43 inches, 6 ribs. Also - Bando - 6PK1090, 6 ribs, 1090mm length. Don't know about the supercharger length. Never seen one installed.

 

is this the stock belt for the 3.6" pulley?

 

Yes, with the V2 kit (if that matters).

 

yup, from what i hear it does.

 

V1 and V2 belt length is different!!!

V2's have an extra pulley so the belts are longer

 

we need a "sticky" of belt sizes!

 

I agree... I wanna know my options...

 

If every one will post

SC Version? V1 or V2
Pulley size?
Belt size?

I will be glad to do a small page on my home page with the info.

 

I'll do the easy one:

V2 Supercharger
3.6" pulley ("stock" kit)
Gates Micro-V K060710

 

the belt i was using was a 69.5" with a 3.33" pulley (v2). The belt was too small and it ripped to shreds. The one stillen sells with the v2 kit is the part # with a 710 at the end ot it. I got a 705 today (70.5") so hopefully it will work out for me.

 

3.33 worked fine with the stock 71.0 size.. 70.5 will still be a little tight..