4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

accident driving to work this morning.

Thread Tools
 
Search this Thread
 
Old Dec 1, 2010 | 09:38 AM
  #1  
asand1's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 3,942
From: Reedsport, OR
accident driving to work this morning.

Nothing serious, hit a curb intering bridge @55MPH. Bent front rim with new tire. Sidewalled rear (old)tire. Hoping my front end will be ok with re-alignment. Hoping to find a snow wheel and used tire for less than $100.
Old Dec 1, 2010 | 09:52 AM
  #2  
hornepirate's Avatar
Senior Member
iTrader: (23)
 
Joined: Mar 2008
Posts: 2,014
From: Florida
pics?
Old Dec 1, 2010 | 02:10 PM
  #3  
asand1's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 3,942
From: Reedsport, OR
At work. I'll try to get some cell phone pics. I found a wrecked 96 with after market aloys and new tires. 1 rim is bent but tire is new, gunna get them and run 1 steally till i get a matching aloy. It'll be ghetto for a while, but thats ok.
Old Dec 1, 2010 | 08:17 PM
  #4  
asand1's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 3,942
From: Reedsport, OR
Well for $100 I got 3 wheels and 4 like new tires.

First the damage;




Wheels are Z or OZ Racing, if anyone know where there might be one of these in 15" Id reall be interestd.;

Old Dec 1, 2010 | 08:36 PM
  #5  
dr_rabias's Avatar
Member
iTrader: (2)
 
Joined: Mar 2010
Posts: 128
From: Anaheim California
check all your suspension components.
make sure steering rack, tie rods, tension rods, control arms and the knuckle are not bent.
good luck
Old Dec 1, 2010 | 09:12 PM
  #6  
AlexxSCM's Avatar
Senior Member
iTrader: (2)
 
Joined: Jun 2009
Posts: 8,773
From: With Wizard, my idol
Old Dec 2, 2010 | 08:11 AM
  #7  
pavelsmax's Avatar
Senior Member
iTrader: (12)
 
Joined: Dec 2002
Posts: 1,144
From: South Jersey
Originally Posted by dr_rabias
check all your suspension components.
make sure steering rack, tie rods, tension rods, control arms and the knuckle are not bent.
good luck



I hit a curb after sliding out on an icy road a few winters ago at 25 mph. I bent my stock steel wheel and also had to replace my lower control arm. good luck hope its an easy fix.
Old Dec 2, 2010 | 09:56 AM
  #8  
asand1's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 3,942
From: Reedsport, OR
Everything looks good visually. Getting an alignment check tonight. I'm trying to locate a matching rim for three I bought.
Old Dec 3, 2010 | 06:40 AM
  #9  
Outatime28's Avatar
Member
 
Joined: Aug 2010
Posts: 143
You can get wheels at Pull a Part for like 20-30$ I'd try that, at least for a temp...not sure if there is one in your area.
Old Dec 3, 2010 | 09:06 AM
  #10  
asand1's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 3,942
From: Reedsport, OR
Originally Posted by Outatime28
You can get wheels at Pull a Part for like 20-30$ I'd try that, at least for a temp...not sure if there is one in your area.
Nope not around here. Ebay and wrecking yards, unfortunately most wreckers arent gonna inventory aftermarket wheels by manufacturer or model, and I cant look in person. I live in BFE Oregon Coast.
Old Dec 3, 2010 | 06:32 PM
  #11  
asand1's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 3,942
From: Reedsport, OR
I went back and got the fourth rim tonight. Doesn't look bad at all, My dad says he can pound it back into shape, TIG weld it, and clean it up in the lathe. Says he fixed a $1,000 Caddy rim that broke just the same.




Old Dec 3, 2010 | 06:50 PM
  #12  
5150pa's Avatar
Member
 
Joined: Jul 2010
Posts: 181
From: Western Pennsylvania
Gruesome damage,

Good on your dad for a free fix
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jerrod99_se-l
4th Generation Classifieds (1995-1999)
2
Aug 27, 2015 08:27 PM
Team STILLEN
Autocrossing and Road Course Racing
0
Aug 10, 2015 04:29 PM
kenc15
5th Generation Classifieds (2000-2003)
0
Aug 5, 2015 08:29 AM




All times are GMT -7. The time now is 02:10 PM.