Help identifying this oil leak coming from...
#1
Help identifying this oil leak coming from...
Hello,
Well after replacing the O-ring of the camshaft position sensor and sealing that little oil leak, now I have another leak somewhere else.
I have traced it down to this area:
http://img820.imageshack.us/img820/1647/areaps.jpg
Here's more detail pics
http://img98.imageshack.us/slideshow...=underrad2.jpg
It leaks quite a bit from I think is from that hose but I'm not sure...I didn't think engine oil went in that area
So....can I repair this myself? Do you think that's the area?
Any help!!!
Thanks
Well after replacing the O-ring of the camshaft position sensor and sealing that little oil leak, now I have another leak somewhere else.
I have traced it down to this area:
http://img820.imageshack.us/img820/1647/areaps.jpg
Here's more detail pics
http://img98.imageshack.us/slideshow...=underrad2.jpg
It leaks quite a bit from I think is from that hose but I'm not sure...I didn't think engine oil went in that area
So....can I repair this myself? Do you think that's the area?
Any help!!!
Thanks
#4
How hard is it to change that hose?
#5
Yup, you can see how wet the lower hose is in the second pic. The PS in 4th gen uses Dexron III trans fluid, so get the correct size tranny cooler line from the parts store and fix it. Should be real easy to do.
Thread
Thread Starter
Forum
Replies
Last Post
Dennis Twohy
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
0
10-01-2015 06:01 PM
MAXSE5SPD
Other For Sale/Wanted
2
08-23-2015 12:06 PM